Datasheet4U Logo Datasheet4U.com

MP6613 - Simple H-Bridge Driver

Description

The MP6613 is an H-bridge motor driver IC designed to drive stepper motors, brushed DC motors, and other loads.

The MP6613 operates across a 4.5V to 45V input voltage (VIN) range.

It can deliver motor current up to 5A, depending on the ambient temperature (TA) and PCB layout.

Features

  • include over-current protection (OCP), input overvoltage protection (OVP), input under-voltage protection (UVP), and thermal shutdown. The MP6613 has several control modes that are configurable via pins. The MP6613 is available in QFN-28 (4mmx5mm) and TSSOP28EP packages.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP6 AC-DC / Configurable Emerson
MP60-E PENTIUM PRO PROCESSOR VOLTAGE REGULATOR MODULE Semtech Corporation
MP60-F KLAMATH PROCESSOR VOLTAGE REGULATOR MODULE Semtech Corporation
MP6005 SINGLE-PHASE SILICON BRIDGE RECTIFIER Dc Components
MP601 SINGLE-PHASE SILICON BRIDGE RECTIFIER Dc Components

Other Datasheets by Monolithic Power Systems

Part Number Description
MP6613GF Simple H-Bridge Driver
MP6613GV Simple H-Bridge Driver
MP6612 H-Bridge DC Motor Driver
MP6612D H-Bridge DC Motor Driver
MP6612DGF H-Bridge DC Motor Driver

Full PDF Text Transcription

Click to expand full text
MP6613 4.5V to 45V, 5A, Simple H-Bridge Driver DESCRIPTION The MP6613 is an H-bridge motor driver IC designed to drive stepper motors, brushed DC motors, and other loads. The MP6613 operates across a 4.5V to 45V input voltage (VIN) range. It can deliver motor current up to 5A, depending on the ambient temperature (TA) and PCB layout. Internal safety and diagnostic features include over-current protection (OCP), input overvoltage protection (OVP), input under-voltage protection (UVP), and thermal shutdown. The MP6613 has several control modes that are configurable via pins. The MP6613 is available in QFN-28 (4mmx5mm) and TSSOP28EP packages. FEATURES • 4.
Published: |