Datasheet4U Logo Datasheet4U.com

MP6515GF - Phase/Enable Control H-Bridge Motor Driver

Download the MP6515GF datasheet PDF. This datasheet also covers the MP6515 variant, as both devices belong to the same phase/enable control h-bridge motor driver family and are provided as variant models within a single manufacturer datasheet.

Description

The MP6515 is an H-bridge motor driver.

It operates from a supply voltage of up to 35V and delivers motor current up to 2.8A.

Typically, the MP6515 is used to drive a DC brush motor.

Features

  • do not require the use of a low-ohm shunt resistor. Internal safety features include over-current protection, input over-voltage protection, undervoltage lockout (UVLO), and thermal shutdown. The MP6515 is available in 16-pin 5.0mmx6.4mm TSSOP-EP and 3mmx4mm QFN package with exposed thermal pad.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP6515-MPS.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MP6501A Power Transistor Toshiba Semiconductor
MP6 AC-DC / Configurable Emerson
MP60-E PENTIUM PRO PROCESSOR VOLTAGE REGULATOR MODULE Semtech Corporation
MP60-F KLAMATH PROCESSOR VOLTAGE REGULATOR MODULE Semtech Corporation
MP6005 SINGLE-PHASE SILICON BRIDGE RECTIFIER Dc Components

Other Datasheets by Monolithic Power Systems

Part Number Description
MP6515GL Phase/Enable Control H-Bridge Motor Driver
MP6515 Phase/Enable Control H-Bridge Motor Driver
MP6510 Single-Phase Brushless DC Motor Driver
MP6513 H-Bridge Motor Driver
MP6513GJ H-Bridge Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology DESCRIPTION The MP6515 is an H-bridge motor driver. It operates from a supply voltage of up to 35V and delivers motor current up to 2.8A. Typically, the MP6515 is used to drive a DC brush motor. For the MP6515, control of the outputs is accomplished through the PHASE, ENBL, BRAKE, and BMODE pins. An internal current sensing circuit provides an output with voltage proportional to the load current. In addition, cycle-by-cycle current regulation/limiting is provided. These features do not require the use of a low-ohm shunt resistor. Internal safety features include over-current protection, input over-voltage protection, undervoltage lockout (UVLO), and thermal shutdown. The MP6515 is available in 16-pin 5.0mmx6.
Published: |