MP6004 Datasheet | Monolithic Power Systems

The Future of Analog IC Technology Primary-Side Regulated Flyback/Buck 80V DCDC Converter DESCRIPTION The MP6004 is a monolithic flyback dc-dc converter with a 180 V power switch that targets isolated or non-isolated 13 W Po E applications. It supports both primary-side regulated flyback and high-voltage buck applications. MP6004 uses fixed peak current and variable frequency discontinuous conduction mode (DCM) to regulate constant output voltage. The primary-side regulation without opto-coupler feedback in flyback mode simplifies the design and saves BOM cost while buck mode minimizes the solution size for non-isolated applications. A 180 V integrated power MOSFET optimizes the device for various wide voltage applications. The MP6004 protection Features include overload protection, over-voltage protection, opencircuit protection, and thermal shutdown. The MP6004 is available in a QFN-14 3mm x 3mm package. Features - Supports Primary-Side Regulated Flyback without Opto-Coupler Feedback - Supports Buck from Up to 80 V Input - Integrated 180 V Switching Power MOSFET - Internal 80 V Start-Up Circuit - Up to 3 A Programmable Current Limit - Discontinuous Conduction Mode - OLP, OVP, Open-Circuit, and Thermal Protection - Flexible Self-Power or External VCC Power - Minimal External ponent Count - Available in a QFN-14 3mm x 3mm Package APPLICATIONS - Security Cameras - Vo IP Phones - WLAN Access Points - General Flyback and Buck Converters All MPS parts are lead-free, halogen-free, and adhere to the Ro HS directive. For MPS green status, please visit the MPS website under Quality Assurance. “MPS” and “The Future of Analog IC Technology” are registered trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION MP6004 Rev. 1.0 .Monolithic Power. 4/14/2015...