Datasheet4U Logo Datasheet4U.com

MP2762A - I2C-Controlled 6A Buck or Boost Charger

General Description

The MP2762A is a highly integrated buck or boost charger IC with narrow voltage DC (NVDC) power path management and USB Onthe-Go (OTG) for battery packs with two cells in series.

All power MOSFETs are integrated to provide a compact system solution size.

Key Features

  • include input over-voltage protection (OVP), battery OVP, system OVP, thermal shutdown, battery temperature protection, and a configured timer to prevent prolonged charging of a dead battery. To comply with IMVP8 specifications, the IC provides three analog output pins for system power (PSYS), input current (IAM), and battery current (IBM). It also has a processor hot ------------------------------ indication pin (.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP270 Low Cost Quartz Crystal CTS
MP270-E Low Cost Quartz Crystal CTS
MP270B Low Cost Quartz Crystal CTS
MP270B-E Low Cost Quartz Crystal CTS
MP2-202S Fast Recovery Diode Sanken

Other Datasheets by Monolithic Power Systems

Part Number Description
MP2760 1-Cell to 4-Cell Buck-Boost Charger
MP2700 1A Linear Charger
MP2702 1A Linear Charger
MP2710 Li-Ion Battery Charger
MP2720A Buck Charger

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP2762A I2C-Controlled 6A Buck or Boost Charger with NVDC Power Managment and USB OTG for 2 Cells in Series Battery Applications DESCRIPTION The MP2762A is a highly integrated buck or boost charger IC with narrow voltage DC (NVDC) power path management and USB Onthe-Go (OTG) for battery packs with two cells in series. All power MOSFETs are integrated to provide a compact system solution size. The IC can accept a wide range of input voltages for charging, with a maximum of 21V. The device has two operating modes during the charging process: boost charging mode when the input voltage is below 5.75V, and buck charging mode when the input voltage exceeds 8.5V. With the I2C interface, the MP2762A can be flexibly configured to set the parameters in both charging mode and OTG mode.