MOSPEC
GBJ20A THRU GBJ20M
GLASS PASSIVATED BRIDGE SINGLE-PHASE
BRIDGE RECTIFIERS
VOLTAGE 50 to 1000 Volts
CURRENT 20 Amperes
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* High case dielectric strength of 2500 VRMS
* Ideal for printed circuit boards
* Glass passivated chip junction
* High surge current capability
* High temperature soldering guaranteed:
260 oC/10 seconds, 0.375 (9.5mm) lead length,
5lbs. (2.3Kg) tension
MECHANICAL DATA
* Case: Molded plastic body
* Terminal: Plated leads solderable per
MIL-STD-750, Method 2026
* Mounting Position: Any (Note 3)
* Mounting Torque: 8 in-lbs max.
Weight: 0.26 oz., 7.0g
MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS
* Rating at 25 ambient temperature unless otherwise specified
* Single phase,half wave. 60Hz, resistive or inductive load.
* For capacitive load derate current by 20 %
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Symbo
l
VRRM
VRWM
VR
GBJ20A
50
GBJ20B GBJ20D GBJ20G GBJ20J GBJ20K GBJ20M
100 200 400 600 800 1000
Unit
V
RMS Reverse Voltage
VR(RMS)
35
70 140 280 420 560 700
V
Average Rectifier Forward Current @ TC=87
@ TA=25
Non-Repetitive Peak Surge Current
8.3 ms Single half sine-wave superimposed on
rated load (JEDEC Method)
IF(AV)
IFSM
20(1)
3.5(2)
240
A
A
Forward Voltage (per element) ( IF =10 Amp)
VFM
1.05
V
Peak Reverse Current
( Rated DC Voltage, TC = 25 )
IR
10
uA
( Rated DC Voltage, TC = 125 )
250
I2 t Rating for Fusing( t<8.3 ms)
I2t
240
A2s
Typical Junction Capacitance per element
Maximum Thermal Resistance per leg
Operating and Storage Temperature Range
Cj
Rθ jA
Rθ jc
TJ , Tstg
140
22(2)
1.5(1)
-55 to +150
pF
oC/W
Note: NOTES:
1. Unit case mounted on Al plate heatsink
2. Unit mounted on P.C.B. without heatsink
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
