Datasheet4U Logo Datasheet4U.com

M1EN - 2-STATES ENCODER

Description

The M1EN is a CMOS ASIC encoder.

It will en-code 12 parallel inputs and serially transmit them to the output when transmits enable TE depressed.

These address inputs are 2 states i.e.

Features

  • ‧ Same Rosc matched to the Decoder M1DA/FA. ‧ 212 = 4,096 codes. ‧ 4 cycles transmission each time. ‧ Direct data transmit type：(Eliminating TE and diodes). ─ M1EN-H：Switch to VDD.

📥 Download Datasheet

Datasheet Details

Part number M1EN
Manufacturer MOSDESIGN
File Size 185.26 KB
Description 2-STATES ENCODER
Datasheet download datasheet M1EN Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by MOSDESIGN

Part Number Description
M1E 2-STATES ENCODER
M1EA 2-STATES ENCODER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MOSDESIGN SEMICONDUCTOR CORP. 2 STATES ENCODER 2 IC EN/DECODER M1EN GENERAL DESCRIPTION The M1EN is a CMOS ASIC encoder. It will en-code 12 parallel inputs and serially transmit them to the output when transmits enable TE depressed. These address inputs are 2 states i.e. LOW (0) or OPEN (1). FEATURES ‧ Same Rosc matched to the Decoder M1DA/FA. ‧ 212 = 4,096 codes. ‧ 4 cycles transmission each time. ‧ Direct data transmit type：(Eliminating TE and diodes). ─ M1EN-H：Switch to VDD. APPLICATIONS ‧ Car/home alarm system, garage control etc.. BLOCK DIAGRAM X Oscillator Y Freq Divider Output Driver TE A0 Input Control Control Logic unit A11 DO *All specs and applications shown above subject to change without prior notice. ( , ) 1/6 2008-10-13 MOSDESIGN SEMICONDUCTOR CORP.
Published: |