Datasheet4U Logo Datasheet4U.com

MM3143A - IC for 150mA Regulator

Download the MM3143A datasheet PDF. This datasheet also covers the MM3141C variant, as both devices belong to the same ic for 150ma regulator family and are provided as variant models within a single manufacturer datasheet.

Features

  • 1. I/O voltage difference 2. Output noise voltage 3. Recommended maximum output current 4. No-load current consumption 5. High ripple rejection rate 6. Output voltage rank 7. Output ON/OFF control function 0.22V typ. (IO=150mA, VOUT=3.0V) 30µVrms typ. 150mA max. 45µA typ. 70dB (1kHz, IOUT=30mA) 1.2~5.0V (0.1V steps) High: ON, Low: OFF Package SOT-25A (MM314 N) PLP-6A (MM314 R).
  • contains the output voltage rank.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MM3141C-MITSUMI.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number MM3143A
Manufacturer MITSUMI
File Size 363.68 KB
Description IC for 150mA Regulator
Datasheet download datasheet MM3143A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MM3111 Audio Power Amplifier Mitsumi Electronics
MM3112 Protection for Lithium-Ion Batteries Mitsumishi
MM3199 Protection for Lithium-Ion/Lithium Polymer Batteries Mitsumi Electronics
MM30-xxxx Connectors JAE
MM3000 GENERAL PURPOSE TRANSISTOR Motorola

Other Datasheets by MITSUMI

Part Number Description
MM3143B IC for 150mA Regulator
MM3143C IC for 150mA Regulator
MM3143D IC for 150mA Regulator
MM3143E IC for 150mA Regulator
MM3143F IC for 150mA Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MITSUMI IC for 150mA Regulator MM314 N, 314 R IC for 150mA Regulator Monolithic IC MM314 N, 314 R Phased Out Products Outline This IC is an ultra-small, low noise CMOS regulator IC that supports ceramic capacitors (low ESR). Output current of up to 150mA can be obtained, and it has a high ripple rejection ratio. Also, the ON/OFF pin makes possible output ON/OFF control. Features 1. I/O voltage difference 2. Output noise voltage 3. Recommended maximum output current 4. No-load current consumption 5. High ripple rejection rate 6. Output voltage rank 7. Output ON/OFF control function 0.22V typ. (IO=150mA, VOUT=3.0V) 30µVrms typ. 150mA max. 45µA typ. 70dB (1kHz, IOUT=30mA) 1.2~5.0V (0.
Published: |