MEI
6A05S THRU
Lead Free
RoHS Compliant
GENERAL PURPOSE RECTIFIER
6A10S
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
6.0 Ampere
FEATURES
• Low reverse leakage
• Low forward voltage
• High forward surge current capacity
• High temperature soldering guaranteed:
260 /10 seconds, 0.375” (9.5mm) lead length
MECHANICAL DATA
• Case: transfer molded plastic
• Epoxy: UL94V – 0 rate flame retardant
• Polarity: Color band denotes cathode end
• Lead: Plated axial lead, solderable per MIL-STD-202E
method 208C
• Mounting position: any
• Weight: 0.06 ounce, 1.7 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25OC ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
R-6S
SYMBOLS 6A05S
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current,
0.375” (9.5mm) lead length at TA = 60OC
Peak Forward Surge Current
VRRM
VRMS
VDC
I(AV)
50
35
50
8.3mS single half sine wave superimposed on
IFSM
rated load (JEDEC method)
Maximum Instantaneous Forward Voltage @ 6.0A
Maximum DC Reverse Current at Rated TA = 25 OC
DC Blocking Voltage per element
TA = 100 OC
VF
IR
Maximum Full Load Reverse Current, full cycle
Average 0.375” (9.5mm) lead length at TL = 105 OC
Typical Junction Capacitance
(Measured at 1.0MHz and applied reverse voltage of 4.0V)
Typical Thermal Resistance (Note 1)
Operating Junction Temperature Range
Storage Temperature Range
IR(AV)
CJ
RθJA
TJ
TSTG
6A1S
100
70
100
6A2S
200
140
200
6A4S
400
280
400
6.0
6A6S
600
420
600
250
0.95
10.0
500
500
100
10
(-55 to +150)
(-55 to +150)
6A8S
800
560
800
6A10S UNIT
1000 Volts
700 Volts
1000 Volts
Amps
Amps
Volts
µA
µA
pF
OC/W
OC
OC
Notes:
1. Thermal resistance from junction to ambient with 0.375” (9.5mm) lead length, PCB mounted with
1.1” x 1.1” (30mm x 30mm) copper pads
