Datasheet4U Logo Datasheet4U.com

MAX1551 - SOT23 Dual-Input USB/AC Adapter 1-Cell Li+ Battery Chargers

General Description

The MAX1551/MAX1555 charge a single-cell lithium-ion (Li+) battery from both USB and AC adapter sources.

They operate with no external FETs or diodes, and accept operating input voltages up to 7V.

Key Features

  • a CHG output to indicate charging status. With USB connected, but without DC power, charge current is set to 100mA (max). This allows charging from both powered and unpowered USB hubs with no port communication required. When DC power is connected, charging current is set at 280mA (typ). No input-blocking diodes are required to prevent battery drain. The MAX1551/MAX1555 are available in 5-pin thin SOT23 packages and operate over a -40°C to +85°C range.
  • Charge from USB or AC Adapter Fe.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX15500 (MAX15500 / MAX15501) Industrial Analog Current/Voltage Output Conditioners Maxim Integrated Products
MAX15501 (MAX15500 / MAX15501) Industrial Analog Current/Voltage Output Conditioners Maxim Integrated Products
MAX1556 1.2A PWM Step-Down DC-DC Converters Maxim Integrated Products
MAX1556A 1.2A PWM Step-Down DC-DC Converters Maxim Integrated
MAX1557 1.2A PWM Step-Down DC-DC Converters Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX155 8-/4-Channel ADCs
MAX1553 40V Step-Up Converters
MAX1554 40V Step-Up Converters
MAX1555 SOT23 Dual-Input USB/AC Adapter 1-Cell Li+ Battery Chargers
MAX150 CMOS High Speed 8Bit A/D Converter with Refrence and Track/Hold Function

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX1551/MAX1555 SOT23 Dual-Input USB/AC Adapter 1-Cell Li+ Battery Chargers AVAILAB LE General Description The MAX1551/MAX1555 charge a single-cell lithium-ion (Li+) battery from both USB and AC adapter sources. They operate with no external FETs or diodes, and accept operating input voltages up to 7V. On-chip thermal limiting simplifies PC board layout and allows optimum charging rate without the thermal limits imposed by worst-case battery and input voltage. When the MAX1551/MAX1555 thermal limits are reached, the chargers do not shut down, but progressively reduce charging current. The MAX1551 includes a POK output to indicate when input power is present. If either charging source is active, POK goes low. The MAX1555 instead features a CHG output to indicate charging status.