Datasheet4U Logo Datasheet4U.com

TP-104 - RF Pulse Transformer

Download the TP-104 datasheet PDF. This datasheet also covers the TP-104-MA variant, as both devices belong to the same rf pulse transformer family and are provided as variant models within a single manufacturer datasheet.

Description

The flux coupled Balun Transformer can provide a wide range of impedance ratios: 1:1, 4:1, 9:1 and 16:1 are most common.

DC isolation from primary coil to secondary coil is also a feature of this device.

Rev.

Features

  • 50 Ohms Unbalanced/200 Ohms Balanced.
  • Low Insertion Loss: 0.4 dB Typical.
  • DC Isolation: Input to Output.
  • MIL-STD-202 Screening Available.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TP-104-MA-COM.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
TP-M105 MICROCASSETTE RECORDER SERVICE MANUAL aiwa
TP-M115 MICROCASSETTE RECORDER SERVICE MANUAL aiwa
TP-UART-IC Twisted Pair - Universal Asynchronous Receive Transmit IC Siemens Semiconductor

Other Datasheets by MACOM Technology Solutions

Part Number Description
TP-101 RF Pulse Transformer
TP-102 RF Pulse Transformer
TP-103 RF Pulse Transformer
TP-105 RF Pulse Transformer
TP-108 RF Pulse Transformer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TP-104 RF Pulse Transformer, 750 KHz - 400 MHz Features • 50 Ohms Unbalanced/200 Ohms Balanced • Low Insertion Loss: 0.4 dB Typical • DC Isolation: Input to Output • MIL-STD-202 Screening Available Description The flux coupled Balun Transformer can provide a wide range of impedance ratios: 1:1, 4:1, 9:1 and 16:1 are most common. DC isolation from primary coil to secondary coil is also a feature of this device. FP-1 Schematic/Pin Configuration Rev. V3 . Electrical Specifications: TA = -55°C to +85°C Parameter Impedance Insertion Loss VSWR Input Power Rise Time Droop (10%) Test Conditions Input - 50 Ohms Unbalanced Output - 200 Ohms Balanced Frequency — Units Min Typ Max — ——— — 10 - 50 MHz dB — — 0.55 — 5 MHz - 200 MHz Ratio — — 1.3:1 750 MHz - 400 MHz Ratio — — 2.
Published: |