SM5T Datasheet | MACOM Technology Solutions

Features - LO 50 TO 5000 MHz - RF 50 TO 5000 MHz - IF 50 TO 3000 MHz - LO Drive +10 d Bm (Nominal) - Insensitive to System Load Mismatch - High Intercept: +18 d Bm Description The SM5T is a termination insensitive mixer, designed for use in military, wireless and test equipment applications. The design utilizes Schottky bridge quad diodes, broadband ferrite baluns and internal loads to provide excellent performance without degradation due to external VSWR mismatches. Environmental screening available to MIL-STD-883, MIL-STD-202 or MIL-DTL-28837, consult factory. Product Image Rev. V3 Ordering Information Part Number SM5T Package Surface Mount Electrical Specifications: Z0 = 50 Ω, Lo = +10 d Bm (Downconverter application only) Parameter Test Conditions Units Typical Guaranteed +25ºC -40º to 85ºC SSB Conversion Loss (max) & SSB Noise Figure (max) f R = 0.05 to 1.5 GHz, f L = 0.05 to 1.5 GHz, f I = 0.05 to 1.5 GHz f R = 1.5 to 3.0 GHz, f L = 1.5 to 3.0 GHz, f I = 0.05 to 3.0 GHz f R = 3.0 to 5.0 GHz, f L = 3.0 to 5.0 GHz, f I = 0.05 to 3.0 GHz d B d B d B 6.9 7.5 8.5 8.3 8.8 10.5 9.0 9.5 11.2 Isolation, L to R (min) Isolation, L to I (min) Isolation, R to I (min) f L = 0.05 to 1.0 GHz f L = 1.0 to 5.0 GHz f L = 0.05 to 1.0 GHz f L = 1.0 to 5.0 GHz f R = 0.05 to 5.0 GHz d B 35 d B 33 d B 40 d B 35 d B 32 25 23 32 25 23 21 30 23 1 d B Conversion p. f L = +10 d Bm d Bm +7 Input IP3 f L = 0.05 to 5.0 GHz, f R = 0.05 to 5.0 GHz, f I = 0.05 to 3.0 GHz d Bm +18 VSWR 1 R-Port f R = 0.05 to 5.0 GHz, L-Port f L = 0.05 to 5.0 GHz, I-Port f I =0.05 to 3.0 GHz 1.8:1 1.6:1 1.4:1 M/A- Technology Solutions Inc. (MA) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit .ma. for additional data sheets and product information. For further information and support please visit: https://.ma./support Wideband Load Insensitive Mixer Absolute Maximum...