MSW2032-203 Datasheet | MACOM Technology Solutions

SP2T PIN Diode Switch Features - Wide Frequency Range: 50 MHz to 6 GHz, in 3 bands - Surface Mount SP2T Switch in pact Outline: 8 mm L x 5 mm W x 2.5 mm H - Higher Average Power Handling than Plastic Packaged - MMIC Switches: 100 W CW - High RF Peak Power: 500 W - Low Insertion Loss: 0.25 d B - High IIP3: 65 d Bm - Operates From Positive Voltage Only: 5 V & 28 V to 125 V - Ro HS- pliant MSW203x-203 Rev. V2 CS203 Functional Schematic J0 Applications - High Power Transmit / Receive Switching J1 J2 - Active Receiver Protection Description The MSW203x-203 series of surface mount silicon PIN diode SP2T switches handle high power signals from 50 MHz to 1 GHz (MSW2030), 400 MHz to 4 GHz (MSW2031) and 2 to 6 GHz (MSW2032), in transmit-receive (TR), active receiver protection and other applications. This series is manufactured using a proven hybrid manufacturing process incorporating high voltage PIN diodes and passive devices integrated within a ceramic substrate. These low profile, pact, surface mount ponents, offer superior small and large signal performance superior to that of MMIC devices in QFN packages. The SP2T switches are designed in an asymmetrical topology to minimize Tx-Ant loss and maximize Tx Rx isolation performance. The very low thermal resistance (<25ºC/W) of the PIN diodes in these devices enables them to reliably handle RF incident power levels of 50 d Bm CW and RF peak incident power levels of 57 d Bm in cold switching applications at TA = 85ºC. The thick I-layers of the PIN diodes (>100 µm), coupled with their long minority carrier lifetime,(>2 µs), provides input third order intercept point (IIP3) greater than 65 d Bm. B1 B2 Ordering Information MSW2030-203-T MSW2030-203-R MSW2030-203-W MSW2031-203-T MSW2031-203-R MSW2031-203-W MSW2032-203-T MSW2032-203-R MSW2032-203-W tube 250 or 500 piece reel Waffle pack tube 250 or 500 piece reel Waffle pack tube 250 or 500 piece reel Waffle pack These MSW203x-203 series SP2T switches are...