900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






MA-COM

MASWSS0115 Datasheet Preview

MASWSS0115 Datasheet

GaAs SPDT Switch

No Preview Available !

MASWSS0115
GaAs SPDT Switch
DC - 3.0 GHz
Features
Insertion Loss: 0.3 dB @ 2.4 GHz
Isolation: 22 dB @ 2.4 GHz
Power Consumption: <5 μA @ +2.3V
Lead-Free SOT-363 Package
Halogen-Free Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of SW-485
Description
M/A-COM’s MASWSS0115 is a GaAs PHEMT
MMIC single pole, double throw (SPDT) switch in a
low cost, lead-free SC-70 (SOT-363) surface mount
plastic package. The MASWSS0115 is ideally suited
for applications where very small size and low cost
are required.
Typical applications are dual band systems which
require switching between small signal components
such as filter banks, single-band LNAs, converters,
etc. This part can be used for low power, low loss
requirements in all systems operating up to 3 GHz,
including PCS, GSM, DCS, Blue Tooth, and other
receive chain applications.
The MASWSS0115 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Functional Schematic
C=39pF
V1
RFC
V2
Rev. V6
RF1
PIN 1
GND
C=39pF
RF2
C=39pF
Pin Configuration
Pin No.
1
2
3
4
5
6
Function
RF1
GND
RF2
V2
RFC
V1
Description
RF Port 1
Ground
RF Port 2
Control 2
RF Input
Control 1
Ordering Information1,2
Part Number
Package
MASWSS0115
Bulk packaging
MASWSS0115TR-3000
3000 piece reel
MASWSS0115SMB
Sample Board
MASWSS0115-DIE
Separated Die on
Grip Ring3
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
3. Die quantity varies.
Absolute Maximum Ratings 4,5
Parameter
Input Power (0.5 - 3.0 GHz)
2.5 V Control
5 V Control
Voltage
Absolute Maximum
+27 dBm
+34 dBm
± 8.5 volts
Operating Temperature
-40 °C to +85 °C
Storage Temperature
-65 °C to +150 °C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support




MA-COM

MASWSS0115 Datasheet Preview

MASWSS0115 Datasheet

GaAs SPDT Switch

No Preview Available !

MASWSS0115
GaAs SPDT Switch
DC - 3.0 GHz
Rev. V6
Electrical Specifications: TA = 25°C, VC = 0 V/2.5 V, Z0 = 50 Ω 6
Parameter
Test Conditions
Units Min.
Typ.
Max.
Insertion Loss7
Isolation
DC - 1 GHz
1 - 3 GHz
DC - 1 GHz
1 - 3 GHz
dB 0.25 0.40
dB 0.30 0.55
dB 20 24
dB 22
Return Loss
0.05 - 3 GHz
dB 20
IP2
Two Tone, +5 dBm/tone, 5 MHz Spacing, >50 MHz dBm
90
IP3
P1dB
Trise, Tfall
Two Tone, +5 dBm/tone, 5 MHz Spacing, >50 MHz dBm
46
VC = 0 V/2.5 V
VC = 0 V/3.0 V
dBm
21
dBm
25
10% to 90% RF, 90% to 10% RF
ns 35
Ton, Toff
50% control to 90% RF, 50% control to 10% RF ns 40
Transients
In band
mV 10
Control Current
VC = 2.5 V
µA — 5 20
6. External DC blocking capacitors are required on all RF ports.
7. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 - 3 GHz.
Truth Table 8,9
Control V1 Control V2 RFC-RF1 RFC-RF2
0 1 On Off
1 0 Off On
8. Differential voltage, V(state 1) - V(state 0), must be +2.3 V
minimum.
9. 0 = 0 V ± 0.2 V, 1 = +2.3 V to 5.0 V
Qualification
Qualified to M/A-COM specification REL-201, Process Flow
2.
Handling Procedures
The following precautions should be observed to avoid dam-
age:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive to electro-
static discharge (ESD) and can be damaged by static elec-
tricity. Proper ESD control techniques should be used when
handling these devices.
Die Bond Pad Layout
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support


Part Number MASWSS0115
Description GaAs SPDT Switch
Maker MA-COM
PDF Download

MASWSS0115 Datasheet PDF






Similar Datasheet

1 MASWSS0115 GaAs SPDT Switch
Tyco Electronics
2 MASWSS0115 GaAs SPDT Switch
MA-COM
3 MASWSS0117 GaAs SPDT 2.7 V High Power Switch
Tyco Electronics
4 MASWSS0118 GaAs SP4T 2.5 V High Power Switch
Tyco Electronics





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy