Datasheet4U Logo Datasheet4U.com

MADC-010736 - Receiver

Download the MADC-010736 datasheet PDF. This datasheet also covers the MADC-010736-MA variant, as both devices belong to the same receiver family and are provided as variant models within a single manufacturer datasheet.

Description

The MADC-010736 is an integrated USB receiver that has a noise figure of 3.5 dB and a typical conversion gain of 12 dB.

The integrated mixer provides image rejection of 30 dBc.

I and Q mixer outputs are provided and an external 90° hybrid is required to complete the image rejection function.

Features

  • Integrates LNA, Image Reject Mixer, LO Doubler, and LO Buffer.
  • 3.5 dB Noise Figure.
  • 12 dB Conversion Gain.
  • 30 dBc Image Rejection.
  • 9 dBm Input Third Order Intercept @ 2 GHz IF.
  • Lead-Free 6 mm Laminate Package.
  • RoHS^ Compliant.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MADC-010736-MA-COM.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MADCSM0001 Dual-Band/Triple-Mode Downconverter Tyco Electronics
MADCSM0011 Dual Mode Cellular Downconverter Tyco Electronics
MADCSM0012 PCS LNA / Downconverter Tyco Electronics
MAD-85 Manchester Decorder Data Delay Devices
MAD1103 Switching Diode Array Microsemi Corporation

Other Datasheets by MACOM Technology Solutions

Part Number Description
MADL-011008 PIN Diode Limiter
MADL-011014 320W Peak Power Limiter
MADP-000907-14020P Solderable AlGaAs Flip-Chip
MADP-000907-14020W Solderable AlGaAs Flip-Chip
MADP-007155-0287DT Surface Mount Plastic PIN Diodes

Full PDF Text Transcription

Click to expand full text
MADC-010736 Receiver, High IIP3, SMD 40.5 - 43.5 GHz Rev. V2 Features  Integrates LNA, Image Reject Mixer, LO Doubler, and LO Buffer  3.5 dB Noise Figure  12 dB Conversion Gain  30 dBc Image Rejection  9 dBm Input Third Order Intercept @ 2 GHz IF  Lead-Free 6 mm Laminate Package  RoHS^ Compliant Description The MADC-010736 is an integrated USB receiver that has a noise figure of 3.5 dB and a typical conversion gain of 12 dB. The integrated mixer provides image rejection of 30 dBc. I and Q mixer outputs are provided and an external 90° hybrid is required to complete the image rejection function. The device integrates an LNA, image reject mixer and LO buffer/doubler within a 6 mm laminate package. It is ideally suited for 42 GHz band point-to-point radios.
Published: |