Datasheet4U Logo Datasheet4U.com

IS31SE5117A - 16-CH PROGRAMMABLE CAPACITIVE TOUCH SENSOR

Description

IS31SE5117A is an ultra-low-power, 16-channel capacitive touch controller.

The controller allows sleep mode (under 10uA) and uses auto-detection for wakeup.

It also provides a shield output to increase moisture immunity.

Features

  • 16-channel capacitive touch controller with readable key value.
  • Touch threshold setting for individual key.
  • Optional multiple-key function.
  • GPIO toggle/invert function.
  • Automatic calibration.
  • Individual key calibration.
  • Interrupt output with auto-clear and repeating.
  • Auto sleep mode for extremely low power.
  • Keys wake up from sleep mode.
  • Shield output shared with touch key channels.
  • Buzzer/Melody Generator shared with touch key channels.

📥 Download Datasheet

Datasheet Details

Part number IS31SE5117A
Manufacturer Lumissil
File Size 711.64 KB
Description 16-CH PROGRAMMABLE CAPACITIVE TOUCH SENSOR
Datasheet download datasheet IS31SE5117A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IS31SE5100 8-CH CAPACITIVE TOUCH SENSOR ISSI
IS31SE5104 4-CH CAPACITIVE TOUCH SENSOR ISSI
IS31SE5000 IR SENSOR ISSI
IS31SE5001 IR SENSOR ISSI
IS314P Photocoupler ISOCOM

Other Datasheets by Lumissil

Part Number Description
IS31SE5118A 8-CH PROGRAMMABLE CAPACITIVE TOUCH SENSOR
IS31SE5120A 24-CH PROGRAMMABLE CAPACITIVE TOUCH SENSOR
IS31AP2005 2.95W MONO FILTER-LESS CLASS-D AUDIO POWER AMPLIFIER
IS31AP4990D 1.2W AUDIO POWER AMPLIFIER
IS31AP4991 1.2W AUDIO POWER AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IS31SE5117A 16-CH PROGRAMMABLE CAPACITIVE TOUCH SENSOR GENERAL DESCRIPTION IS31SE5117A is an ultra-low-power, 16-channel capacitive touch controller. The controller allows sleep mode (under 10uA) and uses auto-detection for wakeup. It also provides a shield output to increase moisture immunity. The built-in hardware monitor and calibration for the environment is to prevent false triggers. A host MCU is required to communicate with IS31SE5117A. An on-chip I²C slave controller with 400kHz capability serves as the communication port for the host MCU. An interrupt, INT, can be configured and it is generated when a touch trigger event occurs. Trigger conditions can be configured by setting the interrupt register. IS31SE5117A can support proximity sensing.
Published: |