Datasheet4U Logo Datasheet4U.com

LP28056S - 1.2A Single-chip Li-ion and Li-POL Charge

Description

The LP28056S is a complete constant-current / constant-voltage linear charger for single cell lithium-ion batteries.

Its ESOP-8 package and low external component count make the LP28056S ideally suited for portable applications.

Features

  • include charge current monitor, under voltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage. Order Information LP28056S.
  • F: Pb-Free Package Type SP: ESOP-8 Features.
  • Programmable Charge Current Up to 1200mA.
  • No MOSFET, Sense Resistor or Blocking Diode Required.
  • Constant-Current/Constant-Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating.

📥 Download Datasheet

Datasheet Details

Part number LP28056S
Manufacturer Lowpowersemi
File Size 491.52 KB
Description 1.2A Single-chip Li-ion and Li-POL Charge
Datasheet download datasheet LP28056S Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LP28056 1.2A Single-chip Li-ion and Li-POL Charge POWER
LP28052 1.2A Single-chip Li-ion and Li-POL Charge POWER
LP28052A 10V/1.2A Single-chip Li-ion and Li-POL Charge Low Power Semi
LP28006 Single and Dual Cell Li+ Battery Charger IC Low Power Semi
LP28009 Single and Dual Cell Li+ Battery Charger IC Low Power Semi

Other Datasheets by Lowpowersemi

Part Number Description
LP28055 1A Single Chip Li-Ion and Li-Polymer Charger
LP28057 1.2A Single-chip Li-ion Charge
LP28011 1A Single Chip Li-Ion and Li-Polymer Charger
LP28013 1A Single Chip Li-Ion and Li-Polymer Charger
LP28021 1.0A Single-chip Li-ion and Li-POL Charger

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Preliminary Datasheet LP28056S 1.2A Single-chip Li-ion and Li-POL Charge General Description The LP28056S is a complete constant-current / constant-voltage linear charger for single cell lithium-ion batteries. Its ESOP-8 package and low external component count make the LP28056S ideally suited for portable applications. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be ISET rammed externally with a single resistor.