TPSMB170CA Datasheet | Littelfuse

Description The TPSMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features - High reliability application and automotive grade AEC Q101 qualified - Surface mount ponent to optimize board space - Low profile package - Fast response time: typically less than 1.0ns from 0V to VBR min - Excellent clamping capability - Low incremental surge resistance - Typical failure mode is short from over-specified voltage or current - Typical IR ≤ 1µA for VR>10.2V - UL Recognized pound meeting flammability rating V-0 - Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c - Meet MSL level1, per J-STD-020, High temperature soldering guaranteed: - ESD protection of data lines in 260°C/10 seconds at terminals accordance with IEC 61000-42 30k V(Air), 30k V (Contact) - EFT protection of data lines in accordance with IEC 61000-4-4 - Glass passivated chip junction - Matte tin lead- free plated - Halogen free and Ro HS pliant - Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is - 600W PPPM (peak pulse tin(Sn) (IPC/JEDEC J-STD- power) capability at 10/1000μs 609A.01) waveform, repetition rate (duty cycles):0.01% Applications TVS ponents are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Automotive applications. Functional Diagram Cathode Bi-directional Uni-directional Anode © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.12/03/20 TPSMB Series Surface Mount - 600W TVS Diode Datasheet Electrical Characteristics (TA=25°C unless...