Datasheet4U Logo Datasheet4U.com

P6SMB82A - TVS Diodes

Download the P6SMB82A datasheet PDF. This datasheet also covers the P6SMB6.8A variant, as both devices belong to the same tvs diodes family and are provided as variant models within a single manufacturer datasheet.

General Description

The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Key Features

  • 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%.
  • Excellent clamping capability.
  • Low incremental surge resistance.
  • Typical IR less than 1μA when VBR min>12V.
  • Optimized surface mount footprint for minimal PCB space impact.
  • Low profile package.
  • Typical failure mode due to exceeding maximum ratings is a short circuit condition.
  • Whisker test conducted based on Table 4a and 4c of JE.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (P6SMB6.8A-Littelfuse.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
P6SMB82A Surface Mount Transient Voltage Suppressors SOCAY
P6SMB82A Surface Mount Transient Voltage Suppressors ANOVA
P6SMB82A 600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR WON-TOP
P6SMB82A TRANSIENT VOLTAGE SUPPRESSORS Central Semiconductor
P6SMB82A Transient Voltage Suppressors Vishay

Other Datasheets by Littelfuse

Part Number Description
P6SMB82CA TVS Diodes
P6SMB8.2A TVS Diodes
P6SMB8.2AT3G 600 Watt Peak Power Zener Transient Voltage Suppressors
P6SMB8.2CA TVS Diodes
P6SMB100A TVS Diodes

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
P6SMB Series TVS Diodes Surface Mount – 600W > P6SMB series RoHS Pb e3 Uni-directional Bi-directional Agency Approvals Agency Agency File Number E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation(Fig.2) by 10/1000us Test Waveform(Fig.4) (Note 1),(Note 2) -Single Die Parts Peak Pulse Power Dissipation(Fig.2) by 10/1000us Test Waveform(Fig.4) (Note.1, Note.2)-Stacked Die Parts (Note.5) PPPM PPPM 600 W 800 W Power Dissipation on Infinite Heat Sink at TL=50OC PD Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only (Note 4) VF 5.0 W 100 A 3.5/5.