900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Littelfuse

P6KE170A Datasheet Preview

P6KE170A Datasheet

TVS Diodes

No Preview Available !

P6KE Series
TVS Diodes
Axial Leaded – 600W > P6KE series
RoHS
Pb e3
Bi-directional
Uni-directional
Agency Approvals
Agency
Agency File Number
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation(Fig.2) by 10/1000us
Test Waveform(Fig.4)(Note 1)
PPPM
-Single Die Parts
Peak Pulse Power Dissipation(Fig.2) by
10/1000us Test Waveform(Fig.4)(Note 1)
PPPM
-Stacked Die Parts(Note 4)
Steady State Power Dissipation on Infinite Heat
Sink at TL=75ºC
PD
Peak Forward Surge Current, 8.3ms Single Half
Sine Wave Unidirectional Only (Note 2)
IFSM
600
W
800
W
5.0
W
100
A
Maximum Instantaneous Forward Voltage at 50A
for Unidirectional Only (Note 3)
VF
3.5/5.0 V
Operating Junction and Storage Temperature
Range
TJ, TSTG -55 to 175 °C
Typical Thermal Resistance Junction to Lead
RƟJL
Typical Thermal Resistance Junction to Ambient RƟJA
20 °C/W
75 °C/W
Notes:
1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) = 25OC per Fig. 3.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum.
3. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.
4. For stacked die component details, please refer to part numbers labeled by * in Electrical Characteristics.
Description
The P6KE Series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
• 600W peak pulse
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Glass passivated chip
junction in DO-15 Package
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Excellent clamping
capability
• Typical failure mode is
short from over-specified
voltage or current
• Whisker test conducted
based on Table 4a and 4c
of JEDEC JESD201A
• IEC 61000-4-2 ESD
30kV(Air), 30kV (Contact)
• EFT protection of data
lines in accordance with
IEC 61000-4-4
• Low incremental surge
resistance
• Typical IR less than 1μA
when VBR min>12V
• Compatible with high
temperature reflow
soldering (260°C/30 s)
• VBR @ TJ= VBR@25°C
x (1+αT x (TJ - 25))
(αT:Temperature
Coefficient, typical value
is 0.1%)
• UL Recognized epoxy
meeting flammability
classification V-0
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
• Pb-free E3 means 2nd
level interconnect is Pb-
free and the terminal finish
material is tin(Sn) (IPC/
JEDEC J-STD-609A.01)
Applications
TVS components are ideal for the protection of I/O
interfaces, VCC bus and other vulnerable circuits used in
telecom, computer, industrial and consumer electronic
applications.
Functional Diagram
Additional Infomarion
Cathode
Bi-directional
Uni-directional
Anode
Datasheet
Resources
Samples
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: JC.10/26/20




Littelfuse

P6KE170A Datasheet Preview

P6KE170A Datasheet

TVS Diodes

No Preview Available !

TVS Diodes
Axial Leaded – 600W > P6KE series
Electrical Characteristics (TA=25°C unless otherwise noted)
Part
Number
(Uni)
P6KE6.8A
P6KE7.5A
P6KE8.2A
P6KE9.1A
P6KE10A
P6KE11A
P6KE12A
P6KE13A
P6KE15A
P6KE16A
P6KE18A
P6KE20A
P6KE22A
P6KE24A
P6KE27A
P6KE30A
P6KE33A
P6KE36A
P6KE39A
P6KE43A
P6KE47A
P6KE51A
P6KE56A
P6KE62A
P6KE68A
P6KE75A
P6KE82A
P6KE91A
P6KE100A
P6KE110A
P6KE120A
P6KE130A
P6KE150A
P6KE160A
P6KE170A
P6KE180A
P6KE200A
P6KE220A
P6KE250A
P6KE300A
P6KE350A*
P6KE400A*
P6KE440A*
P6KE480A*
P6KE510A*
P6KE530A*
P6KE540A*
P6KE550A*
P6KE600A*
Part
Number
(Bi)
Reverse Stand
off Voltage VR
(Volts)
P6KE6.8CA
P6KE7.5CA
P6KE8.2CA
P6KE9.1CA
P6KE10CA
P6KE11CA
P6KE12CA
P6KE13CA
P6KE15CA
P6KE16CA
P6KE18CA
P6KE20CA
P6KE22CA
P6KE24CA
P6KE27CA
P6KE30CA
P6KE33CA
P6KE36CA
P6KE39CA
P6KE43CA
P6KE47CA
P6KE51CA
P6KE56CA
P6KE62CA
P6KE68CA
P6KE75CA
P6KE82CA
P6KE91CA
P6KE100CA
P6KE110CA
P6KE120CA
P6KE130CA
P6KE150CA
P6KE160CA
P6KE170CA
P6KE180CA
P6KE200CA
P6KE220CA
-
P6KE250CA*
-
P6KE300CA*
P6KE350CA*
P6KE400CA*
P6KE440CA*
P6KE480CA*
P6KE510CA*
P6KE530CA*
P6KE540CA*
P6KE550CA*
P6KE600CA*
5.80
6.40
7.02
7.78
8.55
9.40
10.20
11.10
12.80
13.60
15.30
17.10
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
145.00
154.00
171.00
185.00
214.00
214.00
256.00
256.00
300.00
342.00
376.00
408.00
434.00
451.00
460.00
468.00
512.00
Breakdown
Voltage VBR
(Volts) @ IT
Min.
6.45
7.13
7.79
8.65
9.50
10.50
11.40
12.40
14.30
15.20
17.10
19.00
20.90
22.80
25.70
28.50
31.40
34.20
37.10
40.90
44.70
48.50
53.20
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
143.00
152.00
162.00
171.00
190.00
209.00
237.00
237.00
285.00
285.00
332.00
380.00
418.00
456.00
485.00
503.50
513.00
522.50
570.00
Max.
7.14
7.88
8.61
9.55
10.50
11.60
12.60
13.70
15.80
16.80
18.90
21.00
23.10
25.20
28.40
31.50
34.70
37.80
41.00
45.20
49.40
53.60
58.80
65.10
71.40
78.80
86.10
95.50
105.00
116.00
126.00
137.00
158.00
168.00
179.00
189.00
210.00
231.00
263.00
263.00
315.00
315.00
368.00
420.00
462.00
504.00
535.00
556.50
567.00
577.50
630.00
Test
Current
IT
(mA)
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
¹
1
1
1
1
1
1
1
1
1
1
1
1
Maximum
Clamping
Voltage
VC @ Ipp (V)
Maximum
Peak
Pulse Current
Ipp (A)
10.5
58.1
11.3
54.0
12.1
50.4
13.4
45.5
14.5
42.1
15.6
39.1
16.7
36.5
18.2
33.5
21.2
28.8
22.5
27.1
25.2
24.2
27.7
22.0
30.6
19.9
33.2
18.4
37.5
16.3
41.4
14.7
45.7
13.3
49.9
12.2
53.9
11.3
59.3
10.3
64.8
9.4
70.1
8.7
77.0
7.9
85.0
7.2
92.0
6.6
103.0
5.9
113.0
5.4
125.0
4.9
137.0
4.5
152.0
4.0
165.0
3.7
179.0
3.4
207.0
2.9
219.0
2.8
234.0
2.6
246.0
2.5
274.0
2.2
328.0
1.9
344.0
1.8
344.0
2.4
414.0
1.5
414.0
2.0
482.0
1.7
548.0
1.5
602.0
1.4
658.0
1.3
698.0
1.2
725.0
1.2
740.0
1.1
760.0
1.1
828.0
1.0
Maximum
Reverse
Leakage
IR@ VR
(µA)
1000
500
200
50
10
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts, the parts without A are currently available, but not recommended for new designs. The parts with A are preferred.
For stack-die parts, use * to label the part number.
Agency
Approval
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: JC.10/26/20


Part Number P6KE170A
Description TVS Diodes
Maker Littelfuse
PDF Download

P6KE170A Datasheet PDF






Similar Datasheet

1 P6KE170 6.8V - 440V Transient Voltage Suppressor
Taiwan Semiconductor
2 P6KE170 Unidirectional and bidirectional Transient Voltage Suppressor Diodes
Diotec
3 P6KE170 600W TRANSIENT VOLTAGE SUPPRESSOR
WON-TOP
4 P6KE170 600W Transient Voltage Suppressor
SIRECT
5 P6KE170 600W TRANSIENT VOLTAGE SUPPRESSORS
Digitron Semiconductors
6 P6KE170 GLASS PASSIVATED JUNCTION TRANSIENT
MIC
7 P6KE170 TRANSIENT VOLTAGE SUPPRESSORS
UTC
8 P6KE170 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
PAN JIT
9 P6KE170 600 Watt TRANSIENT VOLTAGE SUPPRESSOR
Microsemi





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy