AK1-430C-Y Datasheet | Littelfuse

atures a very fast response and ultra low clamping characteristics as pared to MOVs (Metal Oxide Varistors). These AK ponents can be connected in series and / or parallel to create a very high surge current protection solution. Agency Recognitions AGENCY AGENCY FILE NUMBER E128662 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Operating Storage Temperature Range Operating Junction Temperature Range Symbol Value Unit TSTG -55 to 150 °C TJ -55 to 125 ºC Current Rating1 IPP 1 k A Note: 1. Rated IPP measured with 8/20μs pulse. Functional Diagram Features - Recognized to UL 497B as an Isolated Loop Circuit Protector - Both reflow and wave soldering capable - Very low clamping voltage - Ultra pact: less than one-tenth the size of traditional discrete solutions - Sharp breakdown voltage - Low slope resistance - Bi-directional - IEC-61000-4-2 ESD 15k V(Air), 8k V (Contact) - Symmetric in leads width for easier soldering during assembly. - ESD protection of data lines in accordance with IEC 61000-4-2 - EFT protection of data lines in accordance with IEC 61000-4-4 - UL Recognized pound meeting flammability rating V-0 - Halogen-free and Ro HS pliant - Glass passivated junction - Pb-free E4 means 2nd level interconnect is Pb-free and the terminal finish material is silver Bi-direcctional Electrical Characteristics (TA=25°C unless otherwise noted) Part Numbers Part Marking Standoff Voltage V(Vo Slt Os) Max. Reverse Leakage (IR)µ@AVSO Typical 8IR5O@C (µA) AK1-076C-Y 1-076C 10...