Datasheet4U Logo Datasheet4U.com

LTM4661 - 4A Step-Up uModule Regulator

Description

The LTM®4661 is a synchronous step-up switching mode µModule®(powermodule)regulatorina6.25mm ×6.25mm × 2.42mm BGA package.

Included in the package are the switching controller, power FETs, inductor and all support components.

Features

  • nn Complete Solution in.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LTM4662 Dual 15A or Single 30A DC/DC uModule Regulator Analog Devices
LTM4664 Single 50A uModule Regulator Analog Devices
LTM4668 Quad DC/DC uModule Regulator Analog Devices
LTM4668A Quad DC/DC uModule Regulator Analog Devices
LTM4604 4A DC/DC uModule Regulator Analog Devices

Other Datasheets by Linear Technology (Analog Devices)

Part Number Description
LTM4600 10A High Efficiency DC/DC uModule
LTM4600HV High Efficiency DC/DC uModule
LTM4601 12A uModule Regulators
LTM4601-1 12A uModule Regulators
LTM4601A 12A uModule Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LTM4661 15V, 4A Step-Up µModule Regulator FEATURES nn Complete Solution in <1cm2 (Single-Sided PCB) or 0.5cm2 (Dual-Sided PCB) nn Input Voltage Range: 1.8V to 5.5V, Down to 0.7V After Start-Up nn Output Voltage Range: 2.5V to 15V nn 4A Switch Current nn Dual Phase Operation nn ±3% Maximum Total DC Output Voltage Regulation Over Load, Line and Temperature nn Output Disconnect in Shut Down nn Inrush Current Limit nn External Frequency Synchronization nn Selectable Burst Mode® Operation nn Output Overvoltage and Overtemperature Protection nn 6.25mm × 6.25mm × 2.42mm BGA package APPLICATIONS nn RF Microwave Power Amplifiers nn Battery Powered DC Motors nn 3.3V Bus Telecom Transceivers DESCRIPTION The LTM®4661 is a synchronous step-up switching mode µModule®(powermodule)regulatorina6.25mm ×6.
Published: |