Datasheet4U Logo Datasheet4U.com

LTC5540 - 0.6GHz to 1.3GHz High Dynamic Range Downconverting Mixer

Description

The LTC®5540 is part of a family of high dynamic range passive downconverting mixers covering the 600MHz to 4GHz frequency range.

The LTC5540 is optimized for 0.6GHz to 1.3GHz RF applications.

The LO frequency must fall within the 0.7GHz to 1.2GHz range for optimum performance.

Features

  • n n n n n n n n n n n n n n LTC5540 0.6GHz to 1.3GHz High Dynamic Range Downconverting Mixer.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LTC5548 2GHz to 14GHz Microwave Mixer Linear
LTC5549 2GHz to 14GHz Microwave Mixer Linear
LTC5552 3GHz to 20GHz Microwave Mixer Analog Devices
LTC5556 Dual Programmable Gain Downconverting Mixer Analog Devices
LTC5562 LF-7GHz Wideband Low Power Active Mixer Analog Devices

Other Datasheets by Linear Technology (Analog Devices)

Part Number Description
LTC5541 1.3GHz to 2.3GHz High Dynamic Range Downconverting Mixer
LTC5542 1.6GHz to 2.7GHz High Dynamic Range Downconverting Mixer
LTC5543 2.3GHz to 4GHz High Dynamic Range Downconverting Mixer
LTC5505-1 (LTC5505-1/-2) RF Power Detector
LTC5505-2 (LTC5505-1/-2) RF Power Detector

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Electrical Specifications Subject to Change FEATURES n n n n n n n n n n n n n n LTC5540 0.6GHz to 1.3GHz High Dynamic Range Downconverting Mixer DESCRIPTION The LTC®5540 is part of a family of high dynamic range passive downconverting mixers covering the 600MHz to 4GHz frequency range. The LTC5540 is optimized for 0.6GHz to 1.3GHz RF applications. The LO frequency must fall within the 0.7GHz to 1.2GHz range for optimum performance. A typical application is a LTE or GSM receiver with a 700MHz to 915MHz RF input and high-side LO. The LTC5540 is designed for 3.3V operation, however; the IF amplifier can be powered by 5V for the highest P1dB. An integrated SPDT LO switch with fast switching accepts two active LO signals, while providing high isolation.
Published: |