LT1781 - Low Power 5V RS232 Dual Driver/Receiver with 15kV ESD Protection
Linear Technology (now Analog Devices)
Download the LT1781 datasheet PDF.
This datasheet also covers the LT1 variant, as both devices belong to the same low power 5v rs232 dual driver/receiver with 15kv esd protection family and are provided as variant models within a single manufacturer datasheet.
Key Features
s s
s s s s s s s s
s s s
10mA Max Supply Current ESD Protection to IEC 1000-4-2 Level 4 ±15kV Air Gap, ±8kV Contact Uses Small Capacitors: 0.1µF 120kBaud Operation for RL = 3k, CL = 2500pF 250kBaud Operation for RL = 3k, CL = 1000pF Outputs Withstand ± 30V Without Damage CMOS Comparable Low Power: 40mW Operates from a Single 5V Supply Rugged Bipolar Design Outputs Assume a High Impedance State When Off or Powered Down Meets All RS232 Specifications Available With or Without Shutdown Absolute.
Full PDF Text Transcription for LT1781 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
LT1781. For precise diagrams, and layout, please refer to the original PDF.
LT1780/LT1781 Low Power 5V RS232 Dual Driver/Receiver with ±15kV ESD Protection DESCRIPTIO The LT®1780/LT1781 are dual RS232 driver/receiver pairs with integral charge pu...
View more extracted text
80/LT1781 are dual RS232 driver/receiver pairs with integral charge pump to generate RS232 voltage levels from a single 5V supply. Using only 0.1µF external capacitors, these circuits consume only 40mW of power, and can operate to 120kbaud even while driving heavy capacitive loads. New ESD structures on the chip allow the LT1780/LT1781 to survive ±15kV air gap and ±8kV contact ESD tests per IEC 1000-4-2, eliminating the need for costly TransZorbs® on the RS232 line pins. The LT1780/ LT1781 are fully compliant with EIA RS232 standards. Driver outputs are protected from overload, and can be shorted to ground or up to ± 30V w
More Datasheets from Linear Technology (now Analog Devices)
LT1781 Datasheet
