PW Series WDM Bidirectional 1250MB/s PINTIA RX
• Passive Optical Networks
• Full Duplex Communications
• WDM Bi-Directional transmission
over a single fiber
• Digital or Analog Operation
• Output Power up to 2 mW CW
• -40 to + 85o Operating
• 1310 or 1550 nm FP MQW Laser
• Low Noise 830MHz PIN TIA
• Compact, rugged construction
• Low Threshold Current Lasers
• Low Power Consumption
• Available with optical connectors
• Replaces Discreet Lasers and
These small , compact modules require
• Class 1 Eye Safe Device
minimal board real estate and when
used in pairs deliver full duplex opera-
PD-LD Inc. is now offering its next tion of a singDlaeta9S/1h2e5eut4mU.ocopmtical fiber
generation of WDM style BiDirec- with crosstalk of <-47dB.
tional transmitter and receiver mod- The PD-LD product incorporates low
ules operating in the 1310 and
threshold current, high differential
1550nm optical windows. These de- quantum efficiency MQW(Multiple
vices are designed to simultaneously Quantum Well) FP semiconductor la-
transmit and receive over a single sers whose typical total operating cur-
optical fiber at frequencies from 10 rents are less than 30mA. Customers
to 830 MHz. Dual wavelength bi- may also request DFB lasers.The re-
directional modules replace the need ceiver section offers an 830MHz band-
for a single mode fiber coupled laser width PIN TIA component that is ideal
diode, a fiber coupled InGaAs PIN for digital operation at 1.25GB/s. These
photodiode, a discreet fiber optic receivers deliver typically –23dBm op-
WDM and a second stage optical tical sensitivity at a BER of 10-10 at
isolator. The BiDirectional Modules OC-24/Gigabit Ethernet operation.
combine all of these optical func- AGC allows for high optical input
tions and relieve the user of having power.
to fusion splice several discreet
PD-LD’s BiDirectional WDM modules
units together and then squeeze
are built to meet the demanding re-
them onto their PCB.
quirements for optical networking. See
PD-LD’s other FSAN Bidirectional
Module offerings for devices optimized
for 155MB/s and 622MB/s.
These modules comply with the
Class 1 Eye Safety standards as DataShee
outlined by CDRH1040.10&11, as
well as IEC825-1 and –2.
The PD-LD BiDirectional modules
are assembled using laser welding
processes. This technique guaran-
tees a semiconductor to optical fi-
ber interface that remains stable
over mechanical and environ-
mental and environmental ex-
tremes. The optical semiconductor
die are mounted within hermeti-
cally sealed TO can subassemblies
making them impervious to con-
taminants and moisture.
WDM BiDirectional modules are
built with 1 meter long 9/125/900
um SMF28 fiber optic pigtails.
These fibers may be terminated
with most standard fiber optic con-
nectors including FC, SC, ST and
PD-LD Inc. reserves the right to make modifiations to or discontinue products without prior notice.
03-02 WDM1.25GB BiDi Rev.1
Germany and other countries: LASER COMPONENTS GmbH, Phone: +49 (0)8142 28640, Fax: +49 (0)8142 286411, email@example.com
Great Britain: LASER COMPONENTS Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, firstname.lastname@example.org
DataSheet4 U .com