P6SMA30A Datasheet | LRC

FEATURES - Plastic package has Underwriters Laboratory Flammability Classification 94V-O - For surface mounted applications in order to optimize board space - Low profile package - Built-in strain relief - Glass passivated junction - Low inductance - Excellent clamping capability - Repetition Rate (duty cycle):0.01% - Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional types - Typical IR less than 1m A above 10V - High temperature soldering guaranteed: 260°C/10 seconds, MECHANICAL DATA Case: JEDEC DO-214AC molded plastic Terminals: Axial leads, solderable per MIL-STD-202, Method 208 Polarity: Color band denoted cathode except Bipolar Mounting Position: Any Weight: 0.0026 ounce, 0.075 gram 1.DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types P6SMA62CA We declare that the material of product pliance with ROHS requirements Electrical characteristics apply in both directions.marking like Uni; without color band. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING Peak Power Dissipation at TA=25°C, TP=1ms(Note 1) SYMBOL PPPM Steady State Power Dissipation at TL=75°C(Note 2) PM(AV) Peak Forward Surge Current, 8.3ms Single Half Sine- Wave Superimposed on Rated Load(JECED Method) (Note 3) IFSM VALUE Minimum 600 Operating Temperature Range TJ, -55 to +150 Storage Temperature Range TSTG -55 to +175 NOTES: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2. 2. Mounted on Copper Leaf area of 1.57in2(40mm2)....