Description
Dec.2008
These high gain series couplers use a light emitter diode and an integrated high gain photo detector to provide extremely high current transfer ratio between input and output.Separate pins for the photodiode and output stage result in TTL compatible saturation voltage and high speed operation.Where desired the Vcc and Vo terminals may be tied together to achieve conventional photo darlington operation.A base access terminal allows a gain bandwidth adjustment to be made.Functional
Features
- High current transfer ratio.
- 2000% typical.
- Low input current requirements.
- 0.5mA.
- High output current.
- 60mA.
- CTR guarantee.
- 0~70℃.
- Instantaneous common mode rejection 10KV/μsec.
- TTL compatible output.
- 0.1V VOL typical.
- UL, CSA approved. NC GND 6N138 / 6N139
Truth Table (Positive Logic)
LED OUT
ON L
OFF
H
A 0.1µF bypass Capacitor must be connected between Pin8 and Pin5.