Datasheet4U Logo Datasheet4U.com

ML7005 - DTMF Transceiver

Datasheet Summary

Description

The ML7005 is a multi-functional DTMF transceiver LSI with built-in a DTMF signal generator, a DTMF signal receiver, a call progress tone generator, a call progress tone detector, and a FAX (FX) signal detector.

Features

  • Wide range of power supply voltage : +2.7 V to +5.5 V.
  • Low power consumption Operating mode : 4.0 mA (VDD = 3 V) Typ. Operating mode : 5.0 mA (VDD = 5 V) Typ. Power down mode : 1 mA Typ.
  • The 4-bit processor interface supports both the Intel processor mode in which a read signal and a write signal are used independently of each other, and the Motorola processor mode in which a read signal and a write signal are used in common.
  • The DTMF receiver can select ei.

📥 Download Datasheet

Datasheet preview – ML7005

Datasheet Details

Part number ML7005
Manufacturer LAPIS
File Size 619.60 KB
Description DTMF Transceiver
Datasheet download datasheet ML7005 Datasheet
Additional preview pages of the ML7005 datasheet.

📁 Similar Datasheet

  • ML7000-01 - Single Rail CODEC (OKI electronic componets)
  • ML7000-02 - Single Rail CODEC (OKI electronic componets)
  • ML7000-03 - Single Rail CODEC (OKI electronic componets)
  • ML7001-01 - Single Rail CODEC (OKI electronic componets)
  • ML7001-02 - Single Rail CODEC (OKI electronic componets)
  • ML7001-03 - Single Rail CODEC (OKI electronic componets)
  • ML7011R - (ML7xx1 Series) LASER DIODES FOR OPTICAL COMMUNICATION (Mitsubishi Electric Semiconductor)
  • ML701B8R - InGaAsP-MQW-FP LASER DIODES (Mitsubishi)
  • ML701B8R - (ML7xx8 Series) InGaAsP Laser Diodes (Mitsubishi Electric)
  • ML7033 - Dual-Channel Line Card CODEC (OKI)
Other Datasheets by LAPIS

Full PDF Text Transcription

Click to expand full text
FEDL7005-01 Issue Date: Oct. 18, 2011 ML7005 DTMF Transceiver GENERAL DESCRIPTION The ML7005 is a multi-functional DTMF transceiver LSI with built-in a DTMF signal generator, a DTMF signal receiver, a call progress tone generator, a call progress tone detector, and a FAX (FX) signal detector. Each functional block can be controlled by an external MCU via a 4-bit processor interface. The ML7005 does not contains a modem. However, the DTMF system data transmission is possible at less than 66 bps by setting the DTMF receiver to the high-speed detection mode. The ML7005 operates with low-power consumption and is suitable for remote control systems, especially for ACR (Automatic Cost Routing) controllers. FEATURES • Wide range of power supply voltage : +2.7 V to +5.
Published: |