Datasheet4U Logo Datasheet4U.com

ML3372 - Low Power Narrowband FM IF

Download the ML3372 datasheet PDF. This datasheet also covers the ML3371 variant, as both devices belong to the same low power narrowband fm if family and are provided as variant models within a single manufacturer datasheet.

Description

OPERATING CONDITIONS VCC = 4.0 Vdc, RFIn = 100 µV, fmod = 1.0 kHz, fdev = 3.0 kHz.

ML3371 at f RF = 10.7 MHz (see Figure 11).

Pin 1 Symbol OSC1 Internal Equivalent Circuit Description The base of the Colpitts oscillator.

Features

  • is attenuated by the filter. The typical level is approximately 50 mVpp. 6 7 DEC1 DEC2 DEC2 IF Decoupling. External 0.1 µF capacitors connected to VCC. 8 Quad Coil 8 Quad Coil VCC Quadrature Tuning Coil. Composite (not yet demodulated) 455 kHz IF signal is present. The typical level is 500 mVpp. 10 50 µA Page 6 of 19 www. lansdale. com Issue A ML3371, ML3372.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (ML3371_LANSDALESemiconductor.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number ML3372
Manufacturer LANSDALE Semiconductor
File Size 1.38 MB
Description Low Power Narrowband FM IF
Datasheet download datasheet ML3372 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ML30 TO-220 Power Resistor MAYLOON
ML303 PIN PHOTO DIODE Micro
ML303B PIN PHOTO DIODE Micro
ML308 PIN PHOTO DIODE Micro
ML3101 (ML3xx1) MITSUBISHI LASER DIODES Mitsubishi Electric Semiconductor

Other Datasheets by LANSDALE Semiconductor

Part Number Description
ML3371 Low Power Narrowband FM IF
ML33111 Low Voltage Compander Silicon Monolithic Integrated Circuit
ML3356 Wideband FSK Receiver
ML3102 (ML3100 Series) Logic IC
ML310x (ML3100 Series) Logic IC

Full PDF Text Transcription

Click to expand full text
ML3371 ML3372 www.DataSheet4U.com Low Power Narrowband FM IF Legacy Device: Motorola MC3371, MC3372 The ML3371 and ML3372 perform single conversion FM reception and consist of an oscillator, mixer, limiting IF amplifier, quadrature discriminator, active filter, squelch switch, and meter drive circuitry. These devices are designed for use in FM dual conversion communication equipment. The ML3371/ML3372 are similar to the Motorola MC3361/MC3357 FM IFs, except that a signal strength indicator replaces the scan function controlling driver which is in the MC3361/MC3357. The ML3371 is designed for the use of parallel LC components, while the ML3372 is designed for use with either a 455 kHz ceramic discriminator, or parallel LC components.
Published: |