FMD25 Datasheet | Kreiger

MANUAL GMDSS Marine Radio Decoder Oktober 2005 V 2.xx SHORT DESCRIPTION FMD25 1. Programming the Timer function Call the Setup menue from the default position set the Cursor to position Timer call the Timer function 1.1. Input a new ON-/OFF time with channel frequency activate the Timer-Program for input set the ON time hour go to ON time minutes and set go to OFF time hours and set go to OFF time minutes and set go to channel (receiving frequency) and set enter the ON an OFF time and Channel to the Timer 1.2. Delete a Timer function call deleting a row set number of row to be deleted confirm deleting or exit exit the Timer function exit the Setup-Menue SHORT DESCRIPTION FMD25 2. Recall stored messages call the menue READ MEMORY set Cursor to the desired messages RD NAVTEX : stored NAVTEX messages RD CH x : all stored messages from Timer function call function (Navtex resp. CHx) 2.1. Reading of NAVTEX messages via RD NAVTEX select the desired NAVTEX message show the selected message on the display The singe messages are stored with the NAVTEX identifier i.e. JA54 1. figure = transmitting station 2. figure = type of message following number is number of message scroll trough the message print the displayed message select other messages exit the RD NAVTEX menue SHORT DESCRIPTION FMD25 2.2. Reading weather forecast messages via RD CH x select the channel call the selected channel the stored messages will be displayed with date and time (i.e. 27030829 = 27. March, 08:29 Uhr/UTC) corresponding with the ON time of the timer select the desired message show the selected message on the display scroll trough the message print the selected message printing can be cancelled other messages can be selected exit the menue RD CH x go back to the STDBY mode SHORT DESCRIPTION FMD25 3. Changing the receiving frequency (Channel) call the Setup menue from the default position set the Cursor to the position Channel call the Channel function go to the Channel to be changed...