KK2411N Datasheet | Kodenshi AUK Group

DESCRIPTION Name VCC RSL LFI LF0 GND HF0 HFI Out Pin 1 2 3 4 5 6 7 8 Positive power supply. External resistor Input low frequency oscillator Output low frequency oscillator Negative power supply High frequency oscillator output High frequency oscillator input Tone output Description MAXIMUM RATINGS- Symbol VCC PD Parameter DC Supply Voltage (Referenced to GND) Power Dissipation in Still Air, Plastic DIP Value to +30.0 400 Unit V m W Tstg - Storage Temperature -65 to +150 °C Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Remended Operating Conditions. REMENDED OPERATING CONDITIONS Symbol VCC TA Parameter DC Supply Voltage (Referenced to GND) Operating Temperature Min 13.0 -45 Max 29.0 +65 Unit V °C This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND≤(VIN or VOUT)≤VCC. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused outputs must be left open. KK3726A ELECTRICAL CHARACTERISTICS (Voltages Referenced to GND, TA = -20 to +70°C) Guaranteed Limits Symbol VSI ISI VSUS ISUS VOH VOL IIN Parameter Initiation Supply Voltage (1) Initiation Supply Current (1) Sustaining Voltage (2) Sustaining Current (2) High-Level Output Voltage Low-Level Output Voltage Maximun Input Leakage Current (Pin 3) (Pin 7) f H1 f H2 f L High Frequency 1 High Frequency 2 Low Frequency See Figure 1 No Load VCC=VSUS See Figure 1 VCC=21V, IOH=-15m A, Pin 6=6V, Pin 7=GND VCC=21V, IOL=15m A, Pin 6=GND, Pin 7=6V Pin 3=6V,Pin 4=GND, VCC=21V Pin 7=6V,Pin 6=GND, VCC=21V R3=191KΩ,C3=6800p F R3=191KΩ,C3=6800p F R2=165KΩ,C2=0.47µF Test Conditions See Figure 1 Min 16.8 1.4 9.5 0.7 16.7 461 576 9.0 Typ Max...