Datasheet4U Logo Datasheet4U.com

WP1533AA-YD14V-W152 - HOUSING

Description

The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode.

Static electricity and surge damage the LEDS.

It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs.

Features

  • z Outstanding material efficiency. z Reliable and rugged. z Low current capability. z Housing UL rating: 94V-0. z Housing material: type 66 nylon. z 14V internal resistor. z RoHS compliant. Package Dimensions 4.7mm.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
WP1533BQ-YD Single-Level Circuit Board Indicator Kingbright Corporation
WP113GDT Rectangular LED Kingbright Corporation
WP115VEGW BI-COLOR INDICATOR LAMP Kingbright Corporation
WP119SURKMGKWT 2x5mm BI-COLOR INDICATOR LAMP Kingbright Corporation
WP12 12 Watt Single Output Regulated Power Supplies ETC

Other Datasheets by Kingbright

Part Number Description
WP1533AA-SRD14V-W152 HOUSING
WP1503EC SOLID STATE LAMP
WP1503YC SOLID STATE LAMP
WP154A4SEJ3VBDZGC-CA Full Color LED
WP154A4SUREPBGVGAC Full Color LED

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features z Outstanding material efficiency. z Reliable and rugged. z Low current capability. z Housing UL rating: 94V-0. z Housing material: type 66 nylon. z 14V internal resistor. z RoHS compliant. Package Dimensions 4.7mm HOUSING FOR LED LAMP WITH WIRE Part Number: WP1533AA/YD14V-W152 Yellow Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Remark: Recommended panel mount hole diameterĪ†=6.30-6.35mm; panel thickness 1.