APHB1608ZGSURKC Datasheet | Kingbright

ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features z 1.6mm X0.8mm SMT LED, 0.5mm thickness. z patible with reflow soldering. z Available in various color bination. z Package: 2000pcs / reel. z Moisture sensitivity level : level 3. z Tinned pads for improved solderability. z Ro HS pliant. Package Dimensions 1.6x0.8x0.5mm BI-COLOR SURFACE MOUNT LED Part Number: APHB1608ZGSURKC Green Hyper Red Description The Green source color devices are made with In Ga N on Sapphire Light Emitting Diode. The Hyper Red source color devices are made with Al Ga In P on Ga As substrate Light Emitting Diode. Static electricity and surge damage the LEDS. It is remended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAN0769 APPROVED: WYNEC REV NO: V.1A CHECKED: Allen Liu DATE: JUN/28/2013 DRAWN: Y.Liu PAGE: 1 OF 6 ERP: 1203011134 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20m A Min. Typ. Max. Green (In Ga N) Hyper Red (Al Ga In P) Water Clear - 500 - 200 - - 500 120 250 - - 40 - 90 - Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. - Luminous intensity value is traceable to the CIE127-2007 pliant national standards. Viewing Angle...