SMB10J5.0A THRU SMB10J440CA
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Stand - Off Voltage - 5.0 to 440 Volts Peak Pulse Power - 1000 Watt
FEATURES
● Glass Passivated Die Construction
● Uni- and Bi-Directional Versions Available
● Excellent Clamping Capability
● Plastic Case Material has UL Flammability
Classification Rating 94V-O
● Typical IR less than 1μA above 10V
● Fast Response Time : typically less than 1.0ns from 0v to VBR
MECHANICAL DATA
● Case: JEDEC SMB(DO-214AA), Molded Plastic
● Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
● Polarity: Cathode Band Except Bi-Directional
● Marking: Device Code
● Weight: 0.093 grams (approx.)
SMB ( DO-214AA )
.083(2.11)
.075(1.91)
.155(3.94)
.130(3.30)
.185(4.70)
.160(4.06)
.096(2.44)
.084(2.13)
.060(1.52)
.030(0.76)
.220(5.59)
.200(5.08)
.012(.305)
.006(.152)
.008(.203)
.002(.051)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Parameter
Symbols
Value
Peak power dissipation with a 10/1000 us waveform(1)
PPP
1000
Peak pulse current wih a 10/1000 us waveform(1)
IPP See Next Table
Power dissipation on infinite heatsink at TL = 75 °C
PD 5.0
Peak forward surge current, 8.3 ms single half sinewave
unidirectional only(2)
Maximum instantaneous forward voltage at 50 A for
unidirectional only(3)
IFSM
VF
100
3.5 / 6.5
Operating junction and storage temperature range
TJ，TSTG
-55 to +150
Note:
1)Non-repetitive current pulse per Fig.5 and derated above TA= 25 °C per Fig.1
2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
3)VF<3.5V for devices of VBR<200V and VF<6.5V for devices of VBR>201V
Unit
W
A
W
A
V
℃
