FFM101 Datasheet | KD

FEATURES - The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 - For surface mounted applications - Fast switching for high efficiency - Low reverse leakage - Built-in strain relief,ideal for automated placement - High forward surge current capability - High temperature soldering guaranteed: 250 C/10 seconds at terminals MECHANICAL DATA Case: JEDEC DO-214AC molded plastic body Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.003 ounce, 0.093 grams 0.004 ounce, 0.111 grams SMA(H) SMA(DO-214AC) .062(1.60) .055(1.40) .181(4.60) .157(4.00) .103(2.62) .079(2.00) .060(1.52) .030(0.76) .208(5.28) .188(4.80) .114(2.90) .098(2.50) .012(.305) .006(.152) .008(.203) .002(.051) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375”(9.5mm) lead length at TL= 90 C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=125 C Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range SYMBOLS VRRM VRMS VDC I(AV) FFM 101 50 35 50 FFM 102 100 70 100 FFM 103 200 140 200 FFM 104 400 280 400 FFM...