Datasheet4U Logo Datasheet4U.com

JW1551 - Active Clamp Flyback Controller

Description

JW®1551 is an active clamp flyback controller for offline flyback converter applications.

The JW1551 can be adopted to reduce switching loss and provide high efficiency in whole load range.

JW1551 provide two control outputs, the main power switch control and the active clamp switch control.

Features

  • Boundary Mode Operation at Heavy Load.
  • DCM Operation at Light Load.
  • Burst Mode Control.
  • Built-in Soft-start Function.
  • X-cap Discharge Function.
  • Include a Boost Converter, Allow Vin Range 2.5-38V.
  • Maximum Frequency Setting with a Single External Resistor.
  • Adjustable Line Compensation.
  • High Switching Frequency up to 1.5MHz.
  • Reliable Fault Protections: VIN OVP/UVP, VS OVP/UVP, SCP, Brown-In/Out, OTP, CS Open and Short Protection.
  • QFN4X4-20 Pac.

📥 Download Datasheet

Datasheet Details

Part number JW1551
Manufacturer JoulWatt
File Size 818.72 KB
Description Active Clamp Flyback Controller
Datasheet download datasheet JW1551 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
JW1236B Full color LED control chip ETC
JW1758A Offline Step-down LED Controller SPMICRO
JW1758B Offline Step-down LED Controller SPMICRO
JW1758C Offline Step-down LED Controller SPMICRO
JW1760 Non-Isolated Buck LED Driver Controller SPMICRO

Other Datasheets by JoulWatt

Part Number Description
JW1550 Active Clamp Flyback Controller
JW1556 Asymmetrical Half-Bridge Flyback Controller
JW1501A Multi-Mode Primary-Side Regulation
JW1501B Multi-Mode Primary-Side Regulation
JW15158AS Offline QR GaN Flyback Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
JW1551 Active Clamp Flyback Controller DESCRIPTION JW®1551 is an active clamp flyback controller for offline flyback converter applications. The JW1551 can be adopted to reduce switching loss and provide high efficiency in whole load range. JW1551 provide two control outputs, the main power switch control and the active clamp switch control. JW1551 also has X-cap discharge function to discharge the X-cap when the input is unplugged, which lowers standby power. The JW1551 is available in QFN4X4-20 package. Company’s Logo is Protected, “JW” and “JOULWATT” are Registered Trademarks of JoulWatt technology Inc.
Published: |