Datasheet Details
| Part number | JW1233 |
|---|---|
| Manufacturer | JoulWatt |
| File Size | 483.10 KB |
| Description | Adaptive 100/120Hz Current Ripple Remover |
| Datasheet |
 JW1233 Datasheet
|
|
|
| Part number | JW1233 |
|---|---|
| Manufacturer | JoulWatt |
| File Size | 483.10 KB |
| Description | Adaptive 100/120Hz Current Ripple Remover |
| Datasheet |
JW1233 Datasheet
|
|
|
|
Adaptive 100/120Hz current ripple remover Input voltage range 5V~60V Built-in 60V power MOSFET LED voltage low to 0.4V when LED current is 0.35A Programmable LED current ripple Programmable maximum LED cathode voltage Internal LED voltage limit Internal LED current limit Short/Open protection Hot plug protection Over temperature protection eSOP8 package APPLICATIONS LED lightning JW1233 is used to drive a LED string (≤50V), and remove the 100/120Hz current ripple on AC/DC power by a capacitor between VC and GND.
If the voltage on LED pin exceeds 6V, the current ripple removing function is disabled, which could help limit the power dissipation on chip.
JW1233 provides short protection, open protection and HOT-PLUG protection.
JW1233 Adaptive 100/120Hz Current Ripple Remover Max Input Current ≤0.
| Part Number | Description |
|---|---|
| JW1232 | Adaptive 100/120Hz Current Ripple Remover |
| JW1237 | Adaptive 100/120Hz Current Ripple Remover |
| JW1210 | Scalable Adaptive 100/120Hz Current Ripple Remover |
| JW1220 | Controller for Adaptive 100/120Hz Current Ripple Removing Circuit |
| JW1221 | Controller for Adaptive 100/120Hz Current Ripple Removing Circuit |
| JW1221A | Controller for Adaptive 100/120Hz Current Ripple Removing Circuit |
| JW1120 | 20V Synchronous Buck LED Driver |
| JW1501A | Multi-Mode Primary-Side Regulation |
| JW1501B | Multi-Mode Primary-Side Regulation |
| JW15158AS | Offline QR GaN Flyback Converter |