山东晶导微电子有限公司
Jingdao Microelectronics
Surface mount transient voltage suppressor power 600 watts
Stand-Off Voltage： 6.8V~550V
FEATURES
• For surface mounted applications in order to
optimize board space.
• Low profile package
• Glass passivated junction
• Low inductance
• Plastic package has Underwriters Laboratory
Flammability
MECHANICAL DATA
• Case: SMBF
• Terminals: Solderable per MIL-STD-750, Method 2026
• Approx. Weight: 57mg / 0.002oz
P6SMBF Series
PINNING
PIN DESCRIPTION
1 Cathode
2 Anode
12
Unipolar
Bipolar
Simplified outline SMBF and symbol
Maximum Ratings and Electrical characteristics
Ratings at 25 °C ambient temperature unless otherwise specified.
Parameter
Peak Pulse Power Dissipation on 10/1000 s waveform
(Note1,Note2, Fig.1).
Peak Forward Surge Current,8.3ms Single Half Sine-Wave
Superimposed on Rated Load, (JEDEC Method) (Note 3,Fig4).
Peak Pulse Current on 10/1000 us waveform (Note 1, Fig 3)
Typical Junction capacitance at VR=4V, f=1MHz
ESD Voltage per IEC6100-4-2
Contact
Air
Typical Thermal Resistance Junction to Ambient(Note 2)
Operating Junction Temperature and Storage Temperature Range
Symbol
PPPM
IFSM
(UNI)
IPPM
CJ
VESD1
VESD2
RθJA
Tj, Tstg
Value
600
100
see Table 1
390
30
30
60
-55 ~ +150
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig. 2.
2. Mounted on 5 mm2 (0.13mm thick) land areas.
3. Measured on 8.3ms,single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.
4. Peak pulse power waveform is 10/1000μS.
Unit
W
A
A
pF
kV
°C/W
°C
2016.01
SMBF-TVS-P6SMBF Series -600W
Page 1 of 5
