Datasheet4U Logo Datasheet4U.com

NJW4124 - Lithium-Battery Charger Controller

Description

NJW4124 is a 1-cell and 2-cell lithium ion battery charge control IC with a built-in AC-DC secondary side control feature.

Features

  • Charge Control Feedback by Photocoupler.
  • Adjustable Charge Voltage.
  • Adjustable Pre-Charge and Full Charge Current.
  • Temperature Monitor.
  • Over Charge Timer.
  • Internal Re-Charge function.
  • Delay timers and Hysteresis inputs for high noise immunity.
  • Over Discharge Battery Detect.
  • Over Voltage Protection.
  • Bi-CMOS Technology.
  • Package Outline NJW4124M : DMP20.
  • PIN.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJW4128 Switching Regulator New Japan Radio
NJW4100 Lithium-ion Battery Charger Controller New Japan Radio
NJW4104 45V Ultra low Quiescent current LDO Nisshinbo
NJW4107 LDO New Japan Radio
NJW4109 500mA LDO Nisshinbo

Other Datasheets by New Japan Radio

Part Number Description
NJW4120 Lithium-Battery Charger Controller
NJW4108 Lithium-ion Battery Charger Controller
NJW4119 BUCK SWITCHING REGULATOR
NJW4133 45V 5A MOSFET Switching Regulator
NJW4138 Internal 45V MOSFET Switching Regulator

Full PDF Text Transcription

Click to expand full text
NJW4124 www.DataSheet4U.com Lithium-ion Battery Charger Controller IC with Timer â– GENERAL DESCRIPTION NJW4124 is a 1-cell and 2-cell lithium ion battery charge control IC with a built-in AC-DC secondary side control feature. Using a photocoupler to directly feed back optimum charging voltage and current information to the primary side, it increases energy efficiency, makes possible a smaller charger, and conserves energy. Charging current can be freely set and therefore it is possible to optimize charging according to battery capacity. As safety features it has over voltage, over discharge, temperature detection, and a charge over timer. Also, the adaptor and the charge control circuit are mounted on one chip.
Published: |