NJU6673 Datasheet | New Japan Radio

.. 25-mon x 100-segment BITMAP LCD DRIVER GENERAL DESCRIPTION The NJU6673 is a 25-mon x 100-segment bit map LCD driver to display graphics or characters. It contains 2,500 bits display data RAM, microprocessor interface circuits, instruction decoder, and mon and segment drivers. An image data from MPU through the serial or 8-bit parallel interface are stored into the 2,500 bits internal displayed on the LCD panel through the mons and segments drivers. The NJU6673 displays 25 x 100 dots graphics or 7-character 2-line by 12 x 13 dots character. The NJU6673 contains a built-in OSC circuit for reducing external ponents. And it Features an electrical variable resistor. As result, it reduces the operating current. The operating voltage from 2.4V to 5.5V and low operating current are suitable for small size battery operation items. Features Direct Correspondence of Display Data RAM to LCD Pixel Display Data RAM 2,500 bits LCD Drivers 25-mon and 100-segment Selectable Duty and Bias Ratio ; 1/25 Duty 1/6 Bias or 1/15 Duty 1/5 Bias Direct connection to 8-bit Microprocessor interface for both of 68 and 80 type MPU Serial Interface (SI, SCL, A0, CS) Useful instruction set Display ON/OFF, Display Start Line Set, Page Address Set, Column Address Set, Status Read, Write Display Data, Read Display Data, Normal or Inverse ON/OFF Set, Static Drive ON/Normal Display, EVR Register Set, Read Modify Write, End, Reset, Internal Power Supply ON/OFF, Driver Output ON/OFF, Power Save and ADC select. Power Supply Circuits for LCD; Available attractive operation for small LCD panel without external capacitors for bias stabilization. Booster Circuits(3 times maximum, Voltage boosting polarity : Negative (VDD mon)), Regulator, Voltage Follower(x 4) Precision Electrical Variable Resistance (16 Steps) Low Power Consumption Operating Voltage 2.4V to 5.5V LCD Driving Voltage 4.0V to 10.0V Package Outline Bumped Chip C-MOS Technology (Substrate :...