Datasheet4U Logo Datasheet4U.com

NJU6636 - 16-CHARACTER 2-LINE DOT MATRIX LCD CONTROLLER DRIVER

Description

The NJU6636 is a Dot Matrix LCD controller driver for 16-character 2-line display with icon display in single chip.

Features

  • # # # # # # # # # # # # # # # 16-character 2-line Dot Matrix LCD Controller Driver Maximum 80 Icon Display Serial, 8 Bi t Microprocessor direct Interface Display Data RAM :32 x 8 bits : Maximum 16-character 2line Display Character Generator ROM :9,600 bits ; 240 characters for 5 x 8 dots Character Generator RAM :64 x 5 bits ; 8 Patterns( 5 x 8 dots) Icon Display RAM :16 x 5 bits ; Maximum 80 icon Microprocessor direst accessing to Display Data RAM and Character Generator RAM High Voltage LCD Dri.

📥 Download Datasheet

Datasheet Details

Part number NJU6636
Manufacturer New Japan Radio
File Size 365.40 KB
Description 16-CHARACTER 2-LINE DOT MATRIX LCD CONTROLLER DRIVER
Datasheet download datasheet NJU6636 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJU6631A 16-CHARACTER 1-LINE DOT MATRIX LCD CONTROLLER DRIVER New Japan Radio
NJU6635 16-CHARACTER 2-LINE DOT MATRIX LCD CONTROLLER DRIVER New Japan Radio
NJU6637 16-CHARACTER 3-LINE DOT MATRIX LCD CONTROLLER DRIVER New Japan Radio
NJU6620 12-CHARACTER 4-LINE DOT MATRIX LCD CONTROLLER New Japan Radio
NJU6623 15-CHARACTER 1-LINE DOT MATRIX LCD CONTROLLER DRIVER with OUTPUT PORT New Japan Radio

Other Datasheets by New Japan Radio

Part Number Description
NJU6623A 15ch.1L / Interface System Clock(MHz)
NJU6673 BITMAP LCD DRIVER
NJU6674 Bitmap LCD Driver
NJU6678V BIT MAP LCD DRIVER
NJU6680 BITMAP LCD DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJU6636 www.DataSheet4U.com PRELIMINARY 16-CHARACTER 2-LINE DOT MATRIX LCD CONTROLLER DRIVER with Icon Display ! GENERAL DESCRIPTION The NJU6636 is a Dot Matrix LCD controller driver for 16-character 2-line display with icon display in single chip. It contains voltage converter and regulator, bleeder resistor, CR oscillator, microprocessor Interface circuits, Instruction decoder controller, character generator ROM/RAM and common and segment drivers. The external power supply circuit is simplified by using the bleeder resistance to generate the bias level of LCD driving voltage internally. The microprocessor Interface circuits which operate 2MHz frequency, can be connected directly to serial or 8bit microprocessor. The character generator consists of 9,600 bits ROM and 64 x 5 bits RAM.
Published: |