PW106 Datasheet | JEC

Features .. Universal Input 100 to 250VAC Desktop Style Single Output to 40-70W Regulated Output with Low Ripple Meets Safety Agency Requirements plies with EMI/RFI Regulations CE pliant Impact Resistant Polycarbonate Enclosure Private Label Marking Available 3 Year Warranty Modified and Custom Designs Also Available Model PW106-KA-05-XX PW106-KA-09-XX PW106-KA-12-XX PW106-KA-16-XX PW106-KA-18-XX PW106-KA-24-XX PW106-KA-48-XX Voltage DC (V) 5 9 12 16 18 24 48 Maximum Current (A) 8.00 5.60 5.00 4.01 3.70 2.90 1.45 A : Design Revision Changes Maximum Watts (W) 40.0 50.4 60.0 64.2 66.6 69.6 69.6 Ripple Vp-p max. (m V) 50 90 120 160 180 240 480 K : Manufacturing Location XX : Connector Number Input Voltage Line Frequency Current Protection Configuration PFC 100 to 250VAC -10%, +6% 47 to 63 Hz 1.0A max. at 90VAC Input Internal Primary Current Fuse, Inrush Limiting IEC320-C14 with Ground IEC320-C8 No Ground Min 0.8-0.9 Electrical Topology Dielectric Withstand Leakage Current Spacing Efficiency EMI CE MTBF Switching - PFC, Half Bridge 3,000VAC or 4,250VDC Primary-Secondary Less than 0.75m A at 265VAC 50Hz 6.4mm Primary-Secondary Min 80% plies with EMC Directives CE pliant 100,000 Calculated Hours Output bined Line and Load Voltage Regulation Ripple Transient Response Hold-up Time Protection +/- 1% (excluding cord) 1% Vp-p max. 0.5ms for 50% Load change Typ. 18ms min. @120VAC 18ms min. @240VAC Over-current Protection (Hiccup) Short Circuit Protection Environmental Operating Temp Storage Temp Relative Humidity Alitude Cooling 0˚C to 40˚C with no derating -30˚C to 85˚C 5% to 95% non-condensing 0 - 10,000 feet Convectional - Non vented case Mechanical Case and Dimension LP7 - Desktop 5.08(L) x 3.05(W) x 1.59(H) [in] 129(L) x 77(W) x 40(H) [mm] Black 94V0 Polycarbonate 6ft. 2 Conductor, 18AWG, AULT#3 Connector. Other connectors are also available. Safety Approvals Agency Listings UL60950-1, IEC/EN60950-1 EMC : EN55022 / 55024 / 61000 K60950 Case Material Cord and...