Overview
The VLA606A‐01R is the interface module for IPM drive. F E AT U R E S ‐Containing 6 opto‐couplers for IPM drive and 4 opto‐couplers for Fault Signal for 3 phase inverter ‐With diodes for protection from reverse input voltage ‐SIP saves more space on mother board ‐Pin arrangement fit IPM's pin assign ‐The Isolation voltage between primary and secondary is 2500Vrms(1 min.) A P P L I C AT I O N S Interface for IPM RECCOMMENDED IPM MITSUBISHI IPM series OUTLINE DRAWING Unit : mm 83.0MAX Mark VLA606A-01R XXXX 26.0MAX 4.5 +/-1.5 0.5 +0.2/-0.1 2.54 4.0MAX 31 0.75 +/-0.1 4.0MAX 1 5.5MAX 4.5MAX 9.5MAX EQUIVALENT CIRCUIT 23 24 25 26 27 28 29 30 31 240ohm 1000pF 1kohm 240ohm 1000pF 1kohm 240ohm 1000pF 1kohm 240ohm 1000pF 1kohm 240ohm 1000pF 1kohm 240ohm 1000pF 1kohm 0.22uF 20kohm PC1 0.22uF 20kohm PC3 0.22uF 20kohm PC5 0.22uF 20kohm PC7 0.22uF PC8 20kohm 0.22uF PC9 20kohm PC10 PC2 PC4 PC6 2 HYBRID IC VLA606A-01R IPM interface module 4 3 1 9 8 6 14 13 11 17 18 16 19 20 21 2 7 12 HYBRID IC VLA606A-01R IPM interface module MAXIMUM RATINGS (Unless otherwise noted, Ta=25°C) Parameter Symbol Conditions Supply voltage 1 Supply voltage 2 Supply voltage 3 Input current 1 Input current 2 Vcc1 Vcc2 Vcc3 IF1 IF2 Between pins 4‐1,9‐6,14‐11,17‐16 Between pins 30‐31 Between pins 23‐31 Between pins 23‐24,23‐25,23‐26,23‐27,23‐28,23‐29 Between pins 4‐2,9‐7,14‐12,17‐21 Operating temperature Topr No conde.
