900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Ironwood Electronics

CA-MLF48A-A-Z-T-01 Datasheet Preview

CA-MLF48A-A-Z-T-01 Datasheet

Carrier Adaptor

No Preview Available !

33.02mm [1.300"]
NC 47
37
1
33.02mm
[1.300"]
11
Top View
GND 48
2
12
14
13
38
36
35
26
24
25
23
10.36mm
[0.408"]
Side View
SK-UGA8/49A-03
wwDwe.DscatraipSthioeent:4UC.caorrmier Adaptor
SF-MLF48A-A-02
48 position MLF ZIF socket to 48 position surface mountable MLF emulator foot with test probes.
Pin assignment/ interconnect 1:1.
PAGE 1 of 2
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.
CA-MLF48A-A-Z-T-01 Drawing
© 2004 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: (651) 452-8100
www.ironwoodelectronics.com
Status: Released
Scale: 2:1
Rev: B
Drawing: H. Hansen
Date: 6/29/04
File: CA-MLF48A-A-Z-T-01 Dwg
Modified: 4/14/05




Ironwood Electronics

CA-MLF48A-A-Z-T-01 Datasheet Preview

CA-MLF48A-A-Z-T-01 Datasheet

Carrier Adaptor

No Preview Available !

MLF foot
Top view (not to scale)
22.08mm
[0.869"]
SK-UGA8/49A-03
Recommended torque = 1.5 in. lbs.
(24 in. oz.)
3
board UGA
1
SF-MLF48A-A-02
MLF pin 1
(target board)
2
Gnd,
index pin
1
2
MLF foot
Top view (not to scale)
Apply torque and then
plug into SF-MLF foot.
NOTE: Do not apply
torque when assemby is
pluged into SF-MLF foot.
User Instructions:
Substrate: 2.34mm ±0.18mm [0.092" ±0.007"]
1 FR4/G10 or equivalent high temp material. 17µm
[1/2 oz.] Cu clad. SnPb plating.
2
Pins: material- Brass Alloy 360 1/2 hard; finish-
0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.).
Test points: material- Phosphor Bronze; plating-
3 Sn over 1.27µm [50µ"] Ni. Gold flash on contact
end.
1. Attach SF-MLF48A-A-02 foot to the target board.
2. Turn plastic thumb screws until head touches bottom of CA-MLF48A-A-Z-T-01 board.
3. Insert SK-UGA8/49A-03 into board UGA. Check orientation.
4. Remove socket lid and compression plate.
5. Insert MLF package into IC guide inside socket cavity.
ww67w.. HP.DuoatltdacSoshomeecptk4reUet.scasosmiosnemplbaltye
and
and
socket lid in place.
apply recommended
torque.
8. Carefully insert CA-MLF assembly into SF-MLF feet UGA. Check orientation.
9. Unscrew plastic thumb screws until they hit target board.
PAGE 2 of 2
CA-MLF48A-A-Z-T-01 Drawing
© 2004 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: (651) 452-8100
www.ironwoodelectronics.com
Status: Released
Scale: 2:1
Rev: B
Drawing: H. Hansen
Date: 6/29/04
File: CA-MLF48A-A-Z-T-01 Dwg
Modified:4/14/05


Part Number CA-MLF48A-A-Z-T-01
Description Carrier Adaptor
Maker Ironwood Electronics
PDF Download

CA-MLF48A-A-Z-T-01 Datasheet PDF






Similar Datasheet

1 CA-MLF48A-A-Z-T-01 Carrier Adaptor
Ironwood Electronics





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy