Datasheet4U Logo Datasheet4U.com

ISL55112 - High-Speed Dual Precision CCD Driver

General Description

PIN NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 PIN NAME RGIN H1IN PD ROIC EN H2IN HLIN HL_VP HL_OUT HL_VN VPLUS VSUB H2_VN H2_OUT H2_VP DNC H1_VP H1_OUT H1_VN GND VDD RG_VN RG_OUT RG_VP FUNCTION Logic input for the Reset Gate (low capacitance) driver.

Key Features

  • 2 Horizontal Row Drivers (High Current).
  • 2 Ancillary Drivers (Lower Current).
  • Up to 8V Signal Swing.
  • Unipolar and Bipolar Supply Capability.
  • Adjustable Output Impedance for EMI Control.
  • 3V Logic Interface.
  • Low Propagation Delays.
  • Low Skew: ±500ps.
  • High Clock Rates: 30MHz+.
  • Stand-by and Power-Down Modes.

📥 Download Datasheet

Other Datasheets by Intersil (now Renesas)

Part Number Description
ISL5100A Quad 18V Pin Electronics Driver/Window Comparator
ISL5239 Pre-Distortion Linearizer
ISL5627 Dual 8-bit 3.3V 260MSPS High Speed D/A Converter
ISL5640 3V Dual 8-Bit/ 20/40/60MSPS A/D Converter with Internal Voltage Reference
ISL5727 Dual 10-bit 3.3V 260MSPS High Speed D/A Converter
ISL5740 3V Dual 10-Bit/ 20/40/60MSPS A/D Converter with Internal Voltage Reference
ISL5827 High Speed D/A Converter
ISL58315 High Speed Triple Laser Diode Drivers
ISL5927 High Speed D/A Converter
ISL5929 Dual 14-Bit/ +3.3V/ 130/210MSPS/ CommLink TM High Speed D/A Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com High-Speed Dual Precision CCD Driver ISL55112 The ISL55112 is a high-speed CCD array driver comprising 2 Horizontal drivers with high current output drive and 2 ancillary signal drivers with lower current output drive. The devices can be used in pairs to drive and control two halves of a high pixel count CCD array as used in high end Digital Cameras or Camcorders. The device has a largely symmetric pinout about a center axis to facilitate the placement of the devices on either side of a large CCD array with minimal signal routing disruption. The ISL55112 can accommodate split asymmetric voltage supplies up to 8V total for each of the 4 drivers and has significant flexibility in the selection of these supply voltages within this range.