IH6108MJE
Features
- Ultra Low Leakage
- ID(OFF) ≤ 100p A (Typ)
- r DS(ON) < 400Ω Over Full Signal and Temperature Range
- Power Supply Quiescent Current Less Than 100µA
- ±14V Analog Signal Range
- No SCR Latchup
- Break-Before-Make Switching
- Binary Address Control (3 Address Inputs Control 8 Channels)
- TTL and CMOS patible Strobe Control
- Pin patible with DG508A, HI-508 and ADG508A
- Internal Diode in Series with V+ for Fault Protection
Description
The IH6108 is a CMOS 1-of-8 multiplexer. The part is a plugin replacement for the DG508A. Three-line decoding is used so that the 8 channels can be controlled by 3 Address inputs; additionally a fourth input is provided for use as a system enable. When the ENABLE input is high (5V), a channel is selected by the three Address inputs, and when low (0V) all channels are off. The 3 Address inputs are TTL and CMOS logic patible, with a “1” corresponding to any voltage greater than 2.4V.
Part Number Information
PART NUMBER IH6108MJE IH6108MJE/883B...
