Datasheet4U Logo Datasheet4U.com

HC1-5504B-9 - EIA/ITU PABX SLIC with 40mA Loop Feed

Description

28 PIN PLCC 2 24 PIN DIP/SOIC 1 SYMBOL TIP DESCRIPTION An analog input connected to the TIP (more positive) side of the subscriber loop through a 150Ω feed resistor and a ring relay conta

Features

  • Pin for Pin Replacement for the HC-5504.
  • Capable of 5V or 12V (VB+) Operation.
  • Monolithic Integrated Device.
  • DI High Voltage Process.
  • Compatible With Worldwide PBX Performance Requirements.
  • Controlled Supply of Battery Feed Current for Short Loops (41mA).
  • Internal Ring Relay Driver.
  • Allows Interfacing With Negative Superimposed Ringing Systems.
  • Low Power Consumption During Standby.
  • Switch Hook Ground Key a.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HC10 TRIPLE 3-INPUT POSITIVE-NAND GATES Texas Instruments
HC1000 High End Humidity Sensors Handling Instructions
HC1000 Gel-Like Modulus Gap Filling Material Bergquist
HC101 High End Humidity Sensors Handling Instructions
HC106B 2A SCRs HAOHAI

Other Datasheets by Intersil (Renesas)

Part Number Description
HC1-5504B-5 EIA/ITU PABX SLIC with 40mA Loop Feed
HC1-5502B-5 EIA/ITU PABX SLIC with 30mA Loop Feed
HC1-5502B-9 EIA/ITU PABX SLIC with 30mA Loop Feed
HC1-55536-5 Continuously Variable Slope Delta-Demodulator (CVSD)
HC1-55536-9 Continuously Variable Slope Delta-Demodulator (CVSD)

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HC-5504B Data Sheet July 1998 File Number 2886.5 EIA/ITU PABX SLIC with 40mA Loop Feed The Intersil SLIC incorporates many of the BORSHT functions on a single IC chip. This includes DC battery feed, a ring relay driver, supervisory and hybrid functions. This device is designed to maintain transmission performance in the presence of externally induced longitudinal currents. Using the unique Intersil dielectric isolation process, the SLIC can operate directly with a wide range of station battery voltages. The SLIC also provides selective denial of power. If the PBX system becomes overloaded during an emergency, the SLIC will provide system protection by denying power to selected subscriber loops.
Published: |