HA9P4741-9 Datasheet | Intersil

HA-4741 Data Sheet September 1998 File Number 2922.3 Quad, 3.5MHz, Operational Amplifier HA-4741, which contains four amplifiers on a monolithic chip, provides a new measure of performance for general purpose operational amplifiers. Each amplifier in the HA-4741 has operating specifications that equal or exceed those of the 741-type amplifier in all categories of performance. HA-4741 is well suited to applications requiring accurate signal processing by virtue of its low values of input offset voltage (0.5m V), input bias current (60n A) and input voltage noise (9n V/√Hz at 1k Hz). 3.5MHz bandwidth, coupled with high open-loop gain, allow the HA-4741 to be used in designs requiring amplification of wide band signals, such as audio amplifiers. Audio application is further enhanced by the HA-4741’s negligible output crossover distortion. These excellent dynamic characteristics also make the HA-4741 ideal for a wide range of active filter designs. Performance integrity of multi-channel designs is assured by a high level of amplifier-to-amplifier isolation (69d B at 10k Hz). A wide range of supply voltages (±2V to ±20V) can be used to power the HA-4741, making it patible with almost any system including battery-powered equipment. HA-4741/883 product and data sheets available upon request. Features - Slew Rate - - - - - - . 1.6V/µs - Bandwidth- - - - - - . 3.5MHz - Input Voltage Noise - - - - . . 9n V/√Hz - Input Offset Voltage - - - - . . . . 0.5m V - Input Bias Current - - - - - . 60n A - Supply Range- - - - . . . . ±2V to ±20V - No Crossover Distortion - Standard Quad Pinout Applications - Universal Active...