| Part number | HA2841 |
|---|---|
| Datasheet | HA2841_IntersilCorporation.pdf |
| File Size | 25.33 KB |
| Manufacturer | Intersil (now Renesas) |
| Description | Window Comparator With Independent Adjustments |
|
|
Window parator With Independent Adjustments (HA2841, HA4905) Application Note April 1998 AN9802 Introduction Window parators, or limit parators as they are sometimes called, determine when the input voltage is within a pre-selected range. The output voltage usually goes to a TTL high when the input voltage is within the pre-selected range. A typical window parator circuit normally consists of two parators with two...
See all Intersil (now Renesas) datasheets
| Part Number | Description |
|---|---|
| HA2-2520-2 | 20MHz/ High Slew Rate/ Uncompensated/ High Input Impedance/ Operational Amplifiers |
| HA2-2522-2 | 20MHz/ High Slew Rate/ Uncompensated/ High Input Impedance/ Operational Amplifiers |
| HA2-2525-5 | 20MHz/ High Slew Rate/ Uncompensated/ High Input Impedance/ Operational Amplifiers |
| HA2-2600-2 | 12MHz/ High Input Impedance Operational Amplifiers |
| HA2-2605-5 | 12MHz/ High Input Impedance Operational Amplifiers |
| HA2-2620-2 | 100MHz/ High Input Impedance/ Very Wideband/ Uncompensated Operational Amplifiers |
| HA2-2625-5 | 100MHz/ High Input Impedance/ Very Wideband/ Uncompensated Operational Amplifiers |
| HA2-2640-2 | 4MHz/ High Supply Voltage Operational Amplifiers |
| HA2-2645-5 | 4MHz/ High Supply Voltage Operational Amplifiers |
| HA2-5002-2 | 110MHz/ High Slew Rate/ High Output Current Buffer |
