FN9012 Datasheet - Intersil Corporation

FN9012 Microprocessor CORE Voltage Regulator Two-Phase Buck PWM Controller

VID3 1 VID2 2 VID1 3 VID0 4 VID25mV 5 COMP 6 FB 7 CT 8 16 VCC 15 REF 14 CS13 PWM1 12 PWM2 11 CS+ 10 PWRGD 9 GND GND (Pin 9) Bias and reference ground. All signals are referenced to this pin. PWRGD (Pin 10) Open drain connection. A high voltage level at this pin with a resistor connected to this te.

ISL6562 TM Data Sheet March 2001 File Number 9012 Microprocessor CORE Voltage Regulator Two-Phase Buck PWM Controller The ISL6562 two-phase current mode, PWM control IC together with companion gate drivers, the HIP6601A, HIP6602A, HIP6603A or HIP6604 and MOSFETs provides a precision voltage regulation system for advanced microprocessors. Two-phase power conversion is a marked departure from earlier single phase converter conﬁgurations previously employed to satisfy the ever increasing curre.

FN9012 Features

* of this controller IC include programmable VID codes from the microprocessor that range from 1.050V to 1.825V with an accuracy of ±0.8%. Pull up currents on these VID pins eliminates the need for external pull up resistors. Another feature of this controller IC is the PWRGD monitor circuit which is

FN9012_IntersilCorporation.pdf