Datasheet4U Logo Datasheet4U.com

FN4871 - Multiple Linear Power Controller with ACPI Control Interface

General Description

Connect this pin to the ATX 3.3V output.

This pin provides the output current for the 2V5CLK pin, and is monitored for power quality.

event, this pin is used to report the fault condition by being pulled to 5VSB.

Key Features

  • Provides 5 ACPI-Controlled Voltages - 5VDUAL USB/Keyboard/Mouse (Active/Sleep) - 3.3VDUAL/3.3VSB PCI/Auxiliary/LAN (Active/Sleep) - 2.5VMEM RDRAM (Active/Sleep) - 3.3VMEM SDRAM (Active/Sleep) - 2.5VCLK Clock/Processor Terminations (Active Only).
  • Excellent Output Voltage Regulation - 3.3VDUAL/3.3VSB Output: ±2.0% Over Temperature; Sleep State Only - 2.5VMEM and 3.3VMEM Output: ±2.0% Over Temperature; Both Operational States (3.3VMEM in Sleep Only) - 2.5VCLK Output: ±2.0% Over T.

📥 Download Datasheet

Datasheet Details

Part number FN4871
Manufacturer Intersil (Renesas)
File Size 149.38 KB
Description Multiple Linear Power Controller with ACPI Control Interface
Datasheet download datasheet FN4871 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FN406 Ultra-compact EMC filter SCHAFFNER
FN4117 n-channel JFET Siliconix
FN4117A n-channel JFET Siliconix
FN4392 n-channel JFET Siliconix
FN4393 n-channel JFET Siliconix

Other Datasheets by Intersil (Renesas)

Part Number Description
FN4819 Synchronous-Rectified Buck MOSFET Drivers
FN4819.1 Synchronous-Rectified Buck MOSFET Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HIP6502B TM Data Sheet May 2000 File Number 4871 Multiple Linear Power Controller with ACPI Control Interface The HIP6502B complements either an HIP6020 or an HIP6021 in ACPI-compliant designs for microprocessor and computer applications. The IC integrates four linear controllers/regulators, switching, monitoring and control functions into a 20-pin SOIC package. One linear controller generates the 3.3VDUAL/3.3VSB voltage plane from the ATX supply’s 5VSB output, powering the south bridge and the PCI slots through an external pass transistor during sleep states (S3, S4/S5). A second transistor is used to switch in the ATX 3.3V output for operation during S0 and S1/S2 (active) operating states. Two linear controllers/regulators supply at choice either or both of the computer system’s 2.